[During hold mode, managed speed goes into red band. Only way to prevent this, is to go into selected speed onto the FCU.]

Im unfortunately unable to reproduce this.

Can you maybe give me extra steps on how you did this?

[During hold mode, managed speed goes into red band. Only way to prevent this, is to go into selected speed onto the FCU.]

Can you please tell me over which fix you were holding?

[Full Aircraft Systems Freeze on FMC entry.]

I will note this down in our internal feedback tracker, but unfortunately without any reliable procedure on how to get the FMC to freeze up it will be hard to fix. However we will work hard to get to the bottom of this 🙂

[Is the pressurization system modelled?]

Please follow this tutorial, if it still happens report back.

 

[Is the pressurization system modelled?]

Here is mine, flying at FL290.

 

Can you give me steps on how you achieved your pressure reliably?

[A310 stops following flight director]

I am sorry, I can´t reproduce this.

I reach 10000ft by EH026, and afterwards the plane starts it left turn towards IVLUT, from where it follows the flightplan.

Can you please record a video showing the departure until it doesn´t follow the FPL anymore?

[pls add wheel chocks]

I noted down this feedback, thank you 🙂

[Why are there a limited number (mixed bag) of A310-300 Liveries in the IniManager?]

The liveries listed on IniBuilds.com are for the XP version of the aircraft, not for the MSFS version.

[Radio Not Working When Listening To ATIS]

Heya,

we will look into this, thanks for reporting 🙂

[Plane becomes unresponsive]

2 hours ago, artox67 said:

After pause the flight with ESC for 5 min, the plane comes unresponsive.

Couldn't use any button or switch because they are freeze.

Views are still working, and the only instrument still shows changes is the altimeter.

Flight controls via yoke still working.

Just to say, the Sim himself didn't crash, and I could end the sim on a normal way. So please don't blame MSFS.

Heya, I can´t reproduce this unfortunately.

Can you give me detailed steps on how to reliably reproduce this? Thanks in advance 🙂

[A310 can not see in aircraft menü]

If on PC, please download the Enhanced version from the marketplace.

Also, does the A310 show up in your content manager?

[Cost Index & SimBrief OFP]

SimBrief doesn´t support cost index for the A310.

However a cost index between 45 and 75 will give you a cruise speed of M.78 - M.80

[why is the autopilot not interactable?]

No, there is no log unfortunately.

Can you reliably reproduce this? If so, how?

[FMC freeze]

6 hours ago, e4rthdog said:

Hi!

The route is LGRP->LGSM and i can import it ok from simbrief.

When i try to input the destination STAR and Approach in FMC i get strange results.

1. No insert* button, only return
2. If i try to return and enter it again, then at some point both FMCs are freezing and i cant use them.

LGSM/09 has approaches that are not runway specific (maybe that is the issue)

Heya, for the VOR approach, you´ll need to select "NONE" under STARS to get the *INSERT prompt.

I did however see, that the approaches are both labelled with VORA00, I forwarded this to our team 🙂

[Simbrief import stuck on PENDING]

Network requests from code (from WASM, at least, not sure about JS/HTML instruments) are impacted by MSFS server status. Due to the popularity of the 40th Anniversary update, the servers are under heavy load. The simbrief integration was tested heavily during the production phase. Until server load lightens, the SimBrief uplink may be unreliable, this is unfortunately largely out of our hands.

In the meantime you can use the SimBrief import/export in the iniManager under Pilot Support, as you already said under point 3 🙂

[Constant systems lock up from FMS inputs]

2 hours ago, SebSch said:

I find this too. No reliable way to reproduce though. Once it happened when requesting ATIS from the ACARS menu. Another time when trying to insert a waypoint in the FPLAN. Every system would become unresponsive, although the simulator itself does not crash. 

ATIS request is a known issue and should not be used at this time. It is known to cause crashes, sorry for the inconveniece.

A fix for this will be delivered in the next version 🙂

[Sujet : SimBrief + A310 show me "Pending"]

Network requests from code (from WASM, at least, not sure about JS/HTML instruments) are impacted by MSFS server status. Due to the popularity of the 40th Anniversary update, the servers are under heavy load. The simbrief integration was tested heavily during the production phase. Until server load lightens, the SimBrief uplink may be unreliable, this is unfortunately largely out of our hands.

In the meantime you can use the SimBrief import/export in the iniManager under Pilot Support 🙂

[A310 stops following flight director]

Heya,

can you please tell me which departure this is? Or is it on every departure for you?

[Full Aircraft Systems Freeze on FMC entry.]

Heya!

Sorry, I can´t reproduce this. Do you use any custom LEZL scenery by chance?

If not, can you give me your complete flightplan (FROM/TO) + Alternate flightplan please?

[System Freeze after clicking PROG Button on FMC]

4 minutes ago, Roteroktober said:

Hello,

this happened to me after i entered a ICAO Code into the FMS for the ATIS request (ACARS Page). I could not reproduce this though. 

 

ps.: Thank you for the awesome plane! Felt like christmas... 

Greetings

ATIS request is a known issue, it is better to not use it for now. Will be fixed in the next version though.

[Constant systems lock up from FMS inputs]

If you can provide us with a detailed way on how to reliably reproduce this, we will of course look into it.

But this unfortunately is too vague for the moment.

[Are there any plans to add TERR mode?]

Correct, it cost too much performance, so it was omitted.

[Are there any plans to add TERR mode?]

Heya,

TERR radar is not the most performing item at the moment and hence it was not included. But we have it working in the sim.

[Plans to add failures as in the XP version?]

Not at this time, no.

[System Freeze after clicking PROG Button on FMC]

Yes, more information would be needed.

Can you realiably reproduce this? If yes, how?

Thanks in advance!