AbqVlieger

For me the aircraft is unflyable. I have gone through the update process including the latest .04 version and my flights end up with a similar out of control death spiral. I have searched the forms and this is the closest topic that seems to relate to this problem. All of the improved art work and nice screens do not help me control the aircraft when I am trying to fly. Like most of us I have been flight sim- ing for over 20 years and do try to follow all of the suggestions, including checking all of my hard ware. When a problem only happens with one aircraft that seems to point to a problem with that one aircraft.

I have installed the new v1.0.2. Still have the same problem. Triming the rudder did not fix the problem. Also turned off the auto pilot and this did not fix the problem as well.

I have a similar problem. After reinstalling both MSFS 2020 and 2024 I can install the A350 into 2020 but not into 2024. When I look at the community folder for 2024 there is no files related to iniBuild A350. It would be helpful if we could select where the iniBuilds installer was trying to install. I have the two simulators on 2 different SSD.

Thank you for the information, For me it looks like the problem was caused by a out of trim rudder.

Try this, it seems to be caused by the Air Craft trying to correct for a poorly trimmed rudder. I used Spad.Next to calibrate the rudder and this allowed the aileron to retract.

I think I have a similar problem, I reported the problem as "speed brake" staying up on the right side. I also am using a TCA Sidestick and have tried several different settings. i.e. with Spad.Next, without, same MSFS 2020 hardware setting that I use on the Fenix A320 or just a "default" hardware setting for the Sidestick and I have the same problem. On the ground there is no indication, when I do the after start checklist all of the flight controls are normal. I only have the problem once I am airborne. finally, unlike the OP the aileron do effect my flight causing the AC to constantly turn to the right (roll).

Hello, I have followed the instructions for the update and there are some improvements but once I take off my right speed brake deploys and will not retract. I do remember seeing someone else had this same issue but I could not find their post.

That does not help with this problem.