A350 - Aircraft Manual - FAQs - iniBuilds Forum

The sooner the A380 is in the inimanager the better

1 hour ago, SimonRiley_M said:

I have replied to this question on the forum before. The specific solution is: after updating to version 1.0.3, this interface is disabled by default. Its switch is located in the green box position in the first photo (the second photo is an enlarged detail)

Indeed but if that is already turned on then turning it on again won't make any difference. I and others are having a blank screen with this turned on.

13 hours ago, iniKyle said:

Actually not a bug, this is how the OIS is powered up per the real aircraft docs.

There is an issue though with the screen not showing even with power on adjusting the brightnes control as I mentioned earlier will bring it back

If you are sure it's on at the laptop then try turning the brightness down...yes down just a tiny bit and see if it comes on. This worked for me.

The brightness knob is to the left of the Attitude PFD

Iread elsewhere if you still have the A380 selected as your aircraft in the fee flight screen then you get the update issues. change iot to something else and it shouyld update. failing that uninstall the A380 and then re-install it.

2 hours ago, arville said:

Hello,
When powering up the cockpit, all the screens light up except for the OIS screen, which remains black—even though it was working during the previous flight. Thanks in advance.

I've also had this on the last couple of flights. if you adjust the brighness of the OIS screen "knob just above speaker to the right of the OIS screen" it'll come back. but it'll be gone again next time you load so it does need to be added to the bug list.

On 10/5/2026 at 10:10 AM, BrianT said:

I had tried that and deleting and re-installing EGLL what did work for me (after I parked at the wrong gate) was opening the GSX menu selecting a new gate 305 and then getting it to warp me there. if I spawn in from the main menu it doesn't work....bizzare I shall play around with it some more today to see if I can isolate where the issue might be.

So yesterday I spawned in at Gate 305 GSX repositioned the A380 and multi Jetways worked first time. Today however....
No changes made to anything since yesterday and yet no matter what I try jetways will not connect. I've uninstalled EGLL and the MJtool reinstalled both. Restared GSX numerous times. spawned at gate, taxied to gate. been towed to gate and re-positioned at gate. I've tried gates 301, 303, 305, 307, 405, 406 and then I gave up. went back to main menu spawned in at OMDB and they worked straight away.
Back to main menu and back to EGLL G305 it all works fine 🤷

Clearly there is something weird going on but what is now beyond me.

4 hours ago, dectenor2 said:

1. I have no desire to use the multi jetway tool.

2. It is a visual only thing as far as I’m aware, no passengers can be boarded via the jetways.

3. I don’t want to be downloading and running extra stuff, there is already so much extra software to be utilised in flight sim and I would rather not to add to this list.

4. GSX is the standard ground operations add-on that so many people use. I have never ever before come across an airport that doesn’t allow GSX to connect jetways.

5. I think it’s very poor form that an airport scenery has been specifically designed where one can’t use GSX, and I’ve no desire to support something like that, I would rather just fly somewhere else.

1. That is of course your choice

2. Correct at the moment passengers cannot be boarded

3. Again your choice

4. GSX at the moment doesnt do Multijetways so the only way inibuilds could incorporate them was to do their own thing. They are I believe working with FSDT to resolve this minor issue

5. It hasn't been designed specifically to NOT use GSX. GSXZ isn't compatible at the moment with multijetways and so inibuilds A380 and 350 cannot be showcased properly without multijetways.
   None of the above detracts from my original point which was it doesn't stop your from doing your flight. If as you correctly say it's only "a visual" thing then it really doens't matter whether jetways connect or not. Just fly from point A to point B after all it's a flight sim not an airport handling sim.

15 hours ago, iniKyle said:

Try manually removing the GSX profile, then re-installing through the iniManager.

Thanks!

I had tried that and deleting and re-installing EGLL what did work for me (after I parked at the wrong gate) was opening the GSX menu selecting a new gate 305 and then getting it to warp me there. if I spawn in from the main menu it doesn't work....bizzare I shall play around with it some more today to see if I can isolate where the issue might be.

Have you deleted the Asobo EGLL from within the sim?

Yeah I can't get it to work at EGLL either OMDB worked fine. Any gate at EGLL just gives the multijetway a rotation warning.

6 hours ago, dectenor2 said:

Really we cant use GSX to connect jetways here?

I was going to do a long haul to Dubai at the weekend but will have to scrap that plan now.

Why?
Not being able to connect a jetway via GSX but spending 10 seconds doing it via the multijetway tool supplied in the inimanager doesn't stop you doing a 7+ hour flight

OMDBV2 jetways cannot be controlled by GSX at the moment you have to use the multiple jetway tool available from the inimanager. Even then you will not see passengers boarding and deboarding.

2 hours ago, deepakvrao said:

I am an unbelievably super dumb shit. The plane has Inibuilds written on it. Duh

Nope not dumb, we all do stuff like that. great that you got it at such a good price though.

53 minutes ago, deepakvrao said:

I hope so. How do I check? Newbie here.

Ifyou go back into the marketplace and search for A380 you shold see similar to the below. the one you have purchased should have OWNED written on it. Hopefully you just got a good deal on the iniBuilds one and not purchased the wrong one by mistake.

4 hours ago, deepakvrao said:

Just paid 44 USD for the A380 on the marketplace

Are you sure that's the inibuilds one? and not LVFR's version

23 hours ago, Alex711 said:

Let’s not engage in sophistry, shall we?)))) Example number one — A220 in the Microsoft store has been updated to 1.0.9, but inibuilds hasn’t yet. So, we won’t be doing business with inibuilds anymore, right? ))) But jokes aside, there’s no difference where you buy model airplanes. I’ll say more — if regional prices are available, the Microsoft store is more cost‑effective! I bought the A220 for just under $40. (The A380 costs 51 US dollars.))))) the date of the start of sales on the manufacturer's website only indicates on what date the model will become free)))

Great you like to buy from the MS Store, good for you! I and many others don't also our choice.
By saying someone who chooses not to you "don’t believe in the sincerity", you imply that those we are likely to be engaging in some illicit act, without any proof at all, which I find offensive. Every peice of software on my computer has been legitimately bought and paid for. I'm in the fortunate position of having spare funds to allow me to engage in this and many other hobbies. So maybe you should think before making such scurrilous comments.

On 9/16/2026 at 9:04 AM, Alex711 said:

ps - I don’t believe in the sincerity of those who claim they only buy through the inibuilds app.))))

What does that mean exactly? there are far more reasons not to buy through the Market place than those you've listed for.

On 9/12/2026 at 7:34 AM, iniKyle said:

I've attached a list of supported aircraft for our multi-jetway tool. I see in the photo attached, you are using a 777.

Hope this helps clarify.

Thanks!

So just to clarify further Multi-Jetway tool is only supported for Inibuilds Aircraft?

The installationj path for mine is in the MSFS2024 Community folder. If you have the room on your storage you could try moving everyuthing else in that folder out just leaving the "rkapps-fsrealistic" and the "p42-util-chaseplane" in there and see if that brings it back into your toolbar. If it comes back then one of your other items you had in the Community folder is blocking it for some reason.
Another thought do you have a lot of items in your toolbar as it can only display so many. there is a mod "Wrapping Toolbar - Utilities for MSFS | Flightsim.to" which will display all the items in the toolbar it may be worth trying this first. it's an easy one to try and just delete it if it doens't work.

I use FlowPro so don't have the issue.

If you've installed it in your placed it in your communiuty folder then you access it via the toolbar in the sim. I should also point out that FSRealistic+ also requires Chaseplane whereas FSRealistic does not.

I like you prefer not to use Marketplace, infact the only thing I have from there is the ATR and that's because there was no other choice.
My understanding of Marketplace purchases is that becaasue of the DRM included in them you can't migrate them to a 3rd party seller even if it is the developers own product. So for me I'll be waiting for it to be released in the IniManager.
Having typed all that I've just seen this thread and Kyles reply so ignore my post 😂

"Yes, you will be able to transfer over your Marketplace A380 to the iniManager.

Thanks!

Kyle - Community Manager

iniBuilds Ltd. | inibuilds.com"

On 7/14/2026 at 1:46 PM, Sdwr87 said:

The scenery jumped more than one position up the list with one click of the arrow but it did the trick.

Yeah I'm not sure I understand the logic with the scenery order in 2024 I mean why put the highest order items at the bottom of the list...I mean who does that 😕

16 hours ago, Sdwr87 said:

Interesting. I'll give that a try, thanks

If you get stuck let me know