Suggestions

MSFS2020 ver 1.0.7 Instead of waiting for the programmed waypoint for the step climb to FL400, the FMS has decided that a gradual change is necessary over the next few hours ... which it thinks will only take just a couple of minutes! Can we get step climb and offset joining/leaving properly coded for this long haul airliner. please?

Dear development team, Having done a couple of long hauls with the A350 I have come across one area where it seems to lack a bit of logic. In real life where pilots uplink the winds either prior the flight or in cruise they won't just get their flight plan's winds but the winds from various sources which are more up to date than the flight plans winds. This becomes quite important where one climbs to altitude higher than what Simbrief thought would be possible, because then all of a sudden there is no more wind data one can uplink anymore. Or at least not one where it will actually be beneficial. I would suggest if possible to maybe implement Active Sky as a source t…

When disconecting Autopilot master on joystick ( red autopilot button ), master caution alarm beeps and i cannot unsilent it with a press on master caution button ? If you switch view from cockpit to exterior for 1 second, and go back to cockpit, alarm sound is not present any more I dont know if its only at my side or other people also have same problem ?

MSFS2020 1.0.7 The step climbs entered into the FMS aren't properly inserted into the flight plan. In the example shown in the pics, the step climb from F390 to F400 at JOOPY then strangely shows FL389 next to S/C then FL390 at the next waypoint (miles away) before FL400 at the following waypoint.

A350 MSFS2020. For today's flight I inserted two step climbs. Upon reaching the first I decided the plane was not ready to climb. Message "Step climb deleted" subsequently seen. But it was the second step climb that was deleted from the list, not the first at the waypoint already passed. Surely incorrect behaviour?

As titled, the new autosave function is great. However, it does not redisplay the elapsed flight time or the state of the APU—which is important on the ground during pushback, as the APU is the sole source of power. Additionally, loading a save takes time, but the system doesn't pause during this process. Regarding this last point, could we make the game pause until all screens are fully loaded? This would ensure that those practicing landings using save mode can jump straight into the final approach without having to account for the time needed for the displays to load.

ポップアップ画面は別画面で表示できるように修正し、コックピットビルダーの場合はNDに表示できるようにしてください。MFDです。別画面に表示されているFCUの画面はクリックすることで操作が可能。 POP UP画面で操作したい。

Hello please may you add an Auto-save feature to the A350 were its either integrated in the aircraft to be able to have for example saves every 30minutes, 1hr or 2hrs depending on preference and the plane will save your current position, height speed and Panel state (stuff like your flight plan, fuel used so on and so forth) or maybe it can be a function implemented in collaboration with Volanta, Auto saves will help us the players have more flexibility in flying as at this moment with the WASM issues if one loses a 10hour flight while 9 hours in its not recoverable or if there's a random CTD, Loss of power or some other issue it is not recoverable. It would be absolutely…

The total number of passengers agrees with what was expected from Simbrief. However, the cabin crew always find that the number of passengers in the four compartments doesn't agree with that number, usually with 3 extra stowaways! (16+20+91+91 = 218) Hopefully an easy fix?

Requesting a slider for the APU sound level.

Would it please be possible to reverse MOUSE WHEEL behavior in the VC (esp. for the Overhead). It is intrinsically/ergonomically wrong, currently backwards. Ta- C

Hi, I do see stairs models in \inibuilds-aircraft-a350\SimObjects\GroundVehicles, maybe workable in the future updates?

Hello guys! First of all, I wanted to thank you for the amazing product you have released. A350 for me personally (and I know for a lot of people as well) is the favorite aircraft ever made. Words can’t describe how exited and thankful I am to you guys for finally making this beauty to the sim! One thing I wanted to ask you for is the Aeroflot livery. I think lots of people would like to fly it one day, since it really is gorgeous and ads one more destination to many simmer´s itinerary. Thank you!

Hi Thank you for a wonderful airliner, I had a great few flights in VR this weekend. One improvement I'd like to see is bigger font at least in the OFP report, maybe you can have like a zoom function for it to make it easier to read, especially in VR. The EFB screen is large enough to expand OFP wider towards the menu on the right side of the screen. Or if you could make a general font size setting for the whole efb in the options menu. Thanks!

Have only seen this reported for another aircraft but it would be really nice to have this corrected! From an end user, I'm not sure how difficult this is to correct but I'd like to leave this request out there. A lot of users seem to be very worried about FAP dimming lights in the cabin...so before you come up with a plug-in to connect cabin seat monitors to users' favourite streaming platforms to watch TV while in virtual cruise, a correct ISA dev display would be really nice too.🙂 Cheers guys, the A350 is coming along really nicely!

I'd like to be able to map switches to TCAS STBY, TA, and TARA modes, as well as XPDR Mode from STBY to AUTO in the A350 (FS2020).

Hi, the OIS Enroute page would be signifficantly more useful in cruise if it would display the route like the navigraph app.

Linked to my previous suggestion. If you ask your users to clear WASM folder between updates at the very least make it so that we do not need to recalibrate throttles, relink Navigraph etc. after. Especially since the throttle calibration requires yet another restart in some cases. Move these into a separate folder that does not need to be deleted.

Hi, since it is a frequent suggestion / requirement to clear WASM folder after update, please build this functionality into your updater. Current process: user updates / aircraft updates itself automatically, user needs to navigate to WASM folder and manually clear. User then needs to recalibrate throttles, relink Navigraph etc. Because those are located in the same folder. User experience = terrible Proposed process: user updates / aircraft updates itself automatically. User does not need to manually clear WASM folder because the update clears it automatically / aircraft recompiles WASM from scratch on next launch when a version change is det…

Would be possible to load the route into the Enroute chart section?? Thanks!

This didn't happen on my last flight. I imported the fuel from Simbrief and when I press "SET" It doesn't change anything. FOB stays the same. It doesn't say "Loading Fuel" on top as well. Any help?

The ability to add static stairs to an aircraft door without the need to activate GSX would be amazing. As not every flight is parked at a GSX gate e.g. ferry flights where you end a flight at a hanger instead of a gate.

Will there be an add-on for the 2020-version to put on contrails as for the 24-version?

The trent xwb is a big engine, during start up it will take some time for the fan to speed up, see attached real life video: The fan speeds up way too fast in the sim right now which is unrealistic for a 3 meter diameter fan. I would proposal this as an improvement suggestion

Please add panel states that can be saved as a start up state.