Systems

As the title says, toggle chocks and covers does not work from the EFB. The buttons are red and remain so when pressed. I can remove both from outside the aircraft in walk-around mode. Toggle GPU and toggle jetway do work in the EFB Jim Barrett

Hi Ini team, I would like to report a bug affecting the iniBuilds A321neo on Xbox Series X after Sim Update 5, including the current SU5 beta/hotfix. When importing payload/fuel through the iniBuilds EFB using SimBrief data, the values appear correctly inside the MCDU: BLOCK fuel, FOB predictions, ZFW/ZFWCG, etc. However, the aircraft itself does not actually receive the fuel. On the ECAM FUEL page: all tanks remain at 0 FOB stays at 0 KG fuel flow remains at 0 fuel warnings appear as if the aircraft is empty At the same time, the MCDU clearly shows the imported fuel values and calculations correctly. Important details: this happens only with the iniBuilds A321neo the ini…

I get the wing rocking bug 100% reproducible with each flight. This is the only module that exhibits this behavior. It starts as a small oscillation, and I can see the ailerons and spoilers cycling back and forth. The oscillation grows larger and larger, then it starts over with small ones. I have the VPC WarBRD with the Constellation Alpha, VPC classic rudders, and VPC MongoosT throttle. I would be happy to help debug it with you. Mike

The 321LR (and 320neo v2) both do not have working reverse thrust. The EFB sees the reverse section of the throttle when moved there, but actual throttle in the plane does not beyond idle when going to reverse on the throttle itself. Can we get an update for comparability?

I would like to report a WASM crash that leads to the whole cockpit freezing - no control elements can be manipulated any more, although the simulator continues and the aircraft remains in flight. Control over the cockpit elements returns only after going to the main menu and spawning a new flight. Similar reports have been made by others concerning other airports, but I have now stumbled upon this when trying to fly to SPJC. How to reproduce: Spawn anywhere and plan a flight to SPJC. Then, in the FMS, select arrival for SPJC and choose any one of the ILS approaches. Freezing is immediate and won't allow you even to choose a STAR. If you choose one of the RNAV approa…

I've heard that iniBuilds's aircrafts had some kind of problem with WinWings MCDU's and FCU's. Since i am planning to buy both of them, will i be able to use it at msfs a321lr?

Hey, I've recently bought Microsoft Flight Simulator 2024 and was pretty excited about the variety of - finally - good modelled aircraft coming with the sim. I started by just trying out the Airbus A321LR, expecting to get a good start. The aircraft looks great and everything works as expected from an IRL-Boeing Pilot. I use GSX Pro for Pushback and Ground Services. Apart from the fact that GSX isn't really compatible with the inibuilds boarding procedures, it doesn't work using Pushback either. I started Pushback after setting everything up correctly, and at some point GSX tells you to release parking brakes. On the Boeing and other aircraft that usually means …

Hello every time im trying to do a flight with the Ini A321NLR or INIA320N and getting the error. I have the current Airac. Any Ideas? JDA320

Hello, I apologise for creating a new post, but as my previous one was locked You told me that it wasn't possible to integrate the new EFB into your tablet, because the documentation doesn't exist and neither do the APIs. However, I found it here: Electronic Flight Bag API What's more, Navigraph has managed to integrate its applications into the game's basic EFB. Is this really a problem of technical feasibility, or did Microsoft simply not ask for the EFB to be added by default in the specifications? Regards, HawxNS PS : This request is valid for all Airbus, I didn't want to create a post in each sub-forum.

WASM crash, repeatable. CYYZ - SPJC Import flight from Simbrief Choose any ILS 16 arrival SPJC. FMC freeze, WASM crash. Thanks, Daniel CYYZSPJC_PDF_WASM-Crash.pdf

Using the new radio panel, type a frequency in as the new standby frequency. Then swap it using LSK1 or 2 a few times - it works for a few swaps, sometimes 2 or 3, sometimes over 10, but eventually both sides will end up set to the same frequency and the other will be lost.

Hello @iniBuilds Team, On March 21, I had a question regarding that in the aircraft in MSFS 2024 only, don't have a terrain radar like how the A320neo had it in 2020. Is there any chance that you guys are going to implement that to the A320neo, A321LR, and A330 (All Variants), THe A321LR and A320neo's flood lights (for the PFD's/ND's/ECAMS) are too unrealistically bright and so yellow when flying in the night, can you guys also fix that how you did an AMAZING job with the A330's Flood lights?? If you guys can't put CPDLC on these 3 aircraft, (or 4 because of the A310-300), at least put some AOC scenarios into the MCDU's. The A310-300 has some bugs when flying in Xbox beca…

Hi all, I've gotten a WASM crash at the same exact location in this flight twice in a row with the TCAS and transponder on; with the TCAS and transponder off it was fine. Climbing through FL160, first turn on the SID, the plane continues through the turn earthward. I hope somehow you can get these sorted for the stock Airbuses in FS24, they are honestly fantastic airplanes, its just unfortunate that this crash occurs. (I've had it in probably 80% of my flights in this plane, often in the descent/approach. I never mess with the FMC in flight, I make sure departure, arrival and approach are loaded prior to departure, I haven't done any direct-to's, no changes to t…

Good morning, on the A320 Neo V2, but also on the A321LR, the ground controls often become unresponsive during taxiing, especially right steering. No problems with other aircraft. I tried recalibrating the controller, but nothing. Thank you

For some reason there is a sudden and huge increase in engine noise (through headphones) after take off (5-10sec), which means I have to quickly reduce the volume on the headphones as it is excruciating. Seems like a bug as it is disproportionate to pre- and during take off volume levels and a sudden step-increase.

First time flying a321. During cruise the nose is bobbing / rocking constantly up and down and the trim wheel is constantly moving. If I disengage autopilot, the problem goes away. But this is not usual behaviour. Nothing like this in the a320.

I've been trying to do some flying in any of the iniBuilds Airbus planes in MSFS 2024, but when I try to start taxiing the plane just gets stuck, as if some brakes were applied or the chocks were on. I've made sure I don't have any brakes and that I've removed the chocks. When I put full throttle I see that the plane tries to move, but something is stopping it. What am I doing wrong? How do I fix this problem?

First off, I am loving the default 330 and 21LR. Theyre the only reason I am using 2024 right now lol. I noticed that when I set FLEX, the ECAM gives me a warning saying that FLX is not set. But on the FMA, it does say MAN FLX and does not give me a warning that there is a problem. And on the engine display, it does not indicate a problem, as well as the actual takeoff setting is more or less the same. I have calibrated my throttles and have a custom Airbus throttle kit for my Honeycomb Bravo. The 330 I've noticed this too. I'll jiggle my throttles in the detent, but the warning doesn't go away. https://gyazo.com/6969c905bc59bded73339ba3a68947e4

Aircraft: A321LR Simulator: FS2024 Navdata Method: NAVIGRAPH OFP: https://www.simbrief.com/ofp/flightplans/KMIASPJC_PDF_1747931356.pdf WASM Error: WASM: Error during FMGS_gauge_update execution. Error code : 0xc000001d Specs: Ryzen 9 7950X3D, Nvidia 4090 and 48GB RAM. Autosave File: Closed the sim, I don't see that .bin file in the specified folder. The WASM crash occurs when loading the Arrival - Approach into SPJC. As soon as I press ILSZ16L, WASM crashes.

ILS 25 in YSSY - manual flight, A/THR on: at 300ft AGL A/THR got stuck at a specific N1 level - unable to take over manually or to disconnect using the hardware keybind or the button on the FCU. annoying on final app - only option to get the THR under control was shutting down the engines. (I deleted the WASM folder prior to this flight)

Ok so I am on Xbox if that makes a difference. I was cruising along at 36,000 feet and all of a sudden the ap disconnects and the plane climbs like crazy. Why did this happen? I do not have stick drift nor was I even touching the controls. I do not have a video of it becuase it’s hard to catch. Hopefully others have had the same issue. So I’m not alone.

I am flying at FL350 over Salina, KS. The SAT temperature right now provided by Live Weather is -47C. The ISA reads “-7C”. That is incorrect. Standard ISA temperature at this altitude is -54C, so the ISA deviation field should show “+7” not “-7”

This is more of an error in procedures on my part, but I think the consequences need Polish. I neglected to turn on the APU before pushback and there was no ill effect. Other aircraft I've used will penalize you for this by abruptly disconnecting the GPU. The external model also still shows the GPU attached even dozens of feet away from the gate. I would not expect this to be high in your list for fixes, but wanted to point it out.

Does anyone else have this issue? Already cleared WASM and streamed data.

In the 321 on approach, I adjust the MCDU and freeze .. forced to restart the sim! it's been at least 15 times that I delete all the folders and put my views back, so don't tell me that I have to delete the folders etc. I'm clearly fed up with these inibuilds 330 / 321 planes not working properly. In addition, it was impossible to enter the arrival track, it did not appear in the mcdu, I had to enter everything manually.