Other

On the charts page, in the upper-right, the zoom-in, zoom-out, and rest zoom buttons lack symbology. On the left, the "pin" symbols for pinned charts are also missing.

Many LIDO charts, such as the Airport Operational Information and SID Procedure Text charts, have multiple pages, but there is no way to navigate between them. You have to use the default EFB to view these sorts of charts.

Every time I start a new session, I have to choose my control preset because it resets back to the default of NONE every time I load in.

Hello, I have been experimenting with the External Hardware → MCDU Export feature in the iniBuilds A300 in order to drive an external MCDU display via SimConnect. In general the export works well and the screen contents can be reconstructed quite reliably. However, while implementing a renderer I noticed a few behaviours where the exported data does not seem to match the cockpit display exactly. I wanted to ask if someone from the iniBuilds team could clarify how the export is intended to behave. Observations From testing multiple pages it appears that the exported screen data follows a fixed grid layout with rows and columns plus additional formatting …

So happy to finally have an updated A300 premium on Xbox series X. Performance on SU5 beta is fantastic and I’m loving being back in the skies in my favourite aircraft. But a couple of small things I’ve noticed: 1. many of the clickspots on the overhead panel are tiny compared to the size of the buttons. Takes some very precise mouse movements to turn on the fuel pumps for example. Wouldn’t like to be trying to do it with a controller in cursor mode 2. liveries. The base aircraft comes with less liveries than it did in 2020 and none of the purchased livery packs are compatible. Please bring those to us - I’m missing my flying banana, my UPS freight…

I've done several clean reinstalls (deleting WASM and cache) and I can't find the new features in 1.0.7. Namely, the option to remove engine covers by default. Also time acceleration and pause at TOD. Can't find it anywhere in the EFB (not on the gear icon, or any of the apps). It's like the new update isn't installing. Using inimanger. Tested in PW GE Pax and Cargo variants.

v1.0.7 addressed a previous issue where both pilots were rendered outside the aircraft for the outside view (and the copilot was rendered outside from the inside view), which is a big improvement. Now when pressing the escape key to go make settings changes such adjusting traffic volume or turning on/off aircraft labels, the captain might be rendered outside of the aircraft in the outside view. However, if you change back to the inside view there are no pilots hovering outside the front of the aircraft If you press the escape key to go back to settings, the issue might resolve itself. You may need to escape to settings several times or wait some period of time for …

GE freighter: The overhead lights in the entry area are always on, despite the EFB showing they should be off.

In the latest version, at the start of a new flight, I cannot climb up the default steps that spawn with the plane. The avatar is just stuck at the bottom of the stairs with nowhere to go. If you manuever the pilot around a bit he can get up one step, but that's as far as he'll go.

Note the livery serial: N744FD. This is a PW livery. But the engine gauges and the overhead panel are from the GE version. There is nothing there referencing the EPR.

Hi all, As mentioned by various other users, the freighter version of the A300 Premium for MSFS2024 is riddled with performance issues. I wish I was warned about the state of this version before I spent 60+ euros on it. I'm pretty disappointed since it wasn't released a week ago but close to a year ago. I was/am a big fan of the A300, bought it for XP-11 a couple years ago, and was looking forward to flying it in MSFS2024. My first flight wasn't enjoyable; I noticed some very severe FPS drops along the way and performance degradation while the flight progressed. Starting off with a solid 40 FPS at Leipzig (with FG ON - 100 FPS). Arriving at my stand in Schiphol, my F…

This issue happens sporadically, but frequently enough I see it in some form at least every 2nd or 3rd flight. At some point during the flight you look over and notice your FO is missing. Then (in some cases) you look out the front window and there they are hovering out in space about 20 feet in front of the aircraft, which is the most common, unnerving case. If you go to the external view, you will see both pilots projected out in front of the aircraft. However, in other cases the pilots will be projected somewhere behind the cockpit with one of them hovering in space just outside of the fuselage. And in other cases the FO just goes missing and is presumably being pr…

The A350 performance is so good since 1.1.8 that I hope you can achieve the same level of optimization for the A300. This plane is still one of my favorites but it runs so bad on Xbox X. It needs the same optimizations you do with the A340 and A350.

Been quite a while since this was raised and the forum post closed. Any update on this BIG issue with the A300. Tbh it is putting friends of mine off buying it. They ask me how is it and I have to tell them the truth sadly. Come on INI ... can we have some news on this please. Many thanks

Good afternoon, Inibuilds team! Your aircraft is amazing! I would like to know if you have an estimated date for adding support for the Winwing EFIS + FCU, or for exposing the aircraft data to be used in Mobiflight, so we can create a profile for it and utilize the aircraft with the Winwing products. Best regards.

I saw this in the latest change log, but I don't know where we can enable/disable this?

With the Cargo PW Premium, I have graphics performance drops every second or so. This can be clearly seen in the FPS viewer in the Developer Mode in the upper graph with high red spikes. The effect is a stutter every second, which is really very unpleasant. The frequency and intensity of the spikes change depending on the camera settings. It is very present in the external view. I don't have this phenomenon in the A310 or Passenger PW, for example. What could be the reason? System: i9-13900K - RTX 4090 - 64GB RAM

While the EFB supports MSFS24's 24-hour historical weather feature, this unfortunately is not the case with the IDC. It will always pull the latest real-world METAR. Unfortuantely this makes it useless when using anything other than real-time weather.

Title. a. Can I copy the MP version from v2020 to v2024 to use it in Compatible mode... (i.e., does it work properly)? b. Since the v2024 MP is unavailable, is it possible to purchase the Premium upgrade direct from iB store and use it in v2024...? TiA

When I go to the Enroute Map on the EFB the image displayed, be it IVR high level or Map view constantly flashes and flickers both on the Monitor and in VR.

Flew tonight in the PW freighter, Leipzig to Luton (ini version). Flight started out just fine, no issues, FPS hovering about 60, TLOD 100. However, flying at FL340, the frame rates dropped, and dropped, and dropped so much that by the time we were on final approach to Luton we were down to 12(!!!) FPS. No point any more at that point to continue the flight, even with an autolanding, because once we landed I had no way to control where the plane was going. The only thing I can think of that would have contributed to the terrible FPS drop was opening and closing the default EFB, but other than that, nothing out of the ordinary.

Hi, new a300-600 user here In the A350 there is a button on the pedestal to check if everythings it's ok for Take Off, in the same way on the 737-800 there isn't button but the pilot advance throttle ahead for just a sec to have allert or not if everythings it's ok. How to check if everythings it's ok with the A300-600? Thanks a lot Daniele

BATC has a new update where the aircraft's radio is controlled by the COM1, 2, etc volume and reception /transmission knobs. This does not work correct with either radio stack right now.

I am experiencing frustrating stutters when the strobe and beacon lights are turned on. I encountered this issue at launch and decided to wait for an update, but after revisiting it, I'm still facing the same problem. I have reinstalled the aircraft multiple times and cleared the WASM folder, but nothing has resolved the issue. I'm not sure if this is something on my end, but I miss flying this aircraft and want to make use of the product I purchased. Thank you in advance.

A300 GE freighter, Memphis, attempting to enter airport information on the progress page. This is really getting old for a plane being sold as "Premium."