Systems

I just purchased this aircraft today from the marketplace and apart from some minor issues that were fixed by restarting my pc it works great but sometimes the whole sim freezes but the aircraft is still moving and I can't move my camera and pressing buttons in the aircraft does nothing I can't even exit the sim properly so I have to alt F4. So is this some type of WASM crash or something else? Also when I go into third person view then get back into cockpit view my FPS drops but it fixes after a few seconds not a big issue but still annoying.

A300F PW engines Premium in 2024 Landing 27L in LFPG just as i touched down and pulled the reversers all my screens went orange using navigraph ERROR MESSAGES from console WASM: ERR_FATAL_FILE_ERROR (-239 / ffffff11) WASM: Error -239 / ffffff11 [fsdt-msfs-bridge.wasm] fsdt-msfs-bridge: Simconnect Dispatch proc set. WASM: Error during FMGS_gauge_draw execution. Error code : 0xc000001d WASM: Module vfs://inibuilds-aircraft-a300/SimObjects/Airplanes/A300-600/attachments/inibuilds/Function_Interior_Freighter/panel/inibuilds-A300.wasm is now dirty PC SPECS ... 9800X3D .. Radeon 9070XT .. 64GB RAM EGLLLFPG_PDF_1763232966.pdf

On my most recent flight with the A300-600R premium (MSFS2024) my fuel gauges suddenly went haywire and I lost quite a bit of tripfuel, resulting in a fuel emergency landing. Also from somewhere in the middle of the flight my DC power (or at least the batteries) died. I discovered this during the ECAM page checks. Verified via the analog indicator in the overhead panel; all 3 batteries dead. The battery issue I have seen with the A330-200/300 in MSFS2024 as well. On approach for LICJ Palermo the STAR page didn't have a great day either. I first selected the arrival (in this case the ROSAS5L RNAV RWY25 but the ILS for runway 25 was not in the available approach l…

I noticed a weird bug with the W&B calculations. What I did: - Simbrief import of weights into the EFB and applied load >> EFB shows correct weights - When I click the LSK next to ZFW in the MCDU to import the ZFW it shows the wrong weight What is interesting is that it only happens having selected the imperial system (lbs). Using the metric system (kgs) everything works absolutely fine. Tested with PAX Version GE

Hi, I’ve been enjoying cargo ops in MSFS20, yet in MSFS24 I’m stuck with two options : - Fly the A300 with TAA and pretty bad FPS - Fly the A300 with DLSS and extreme ghosting on every needles and displays (and not that much of an improvement in terms of framerate) To be honest, this aircraft is my worst performing one. To mention for example the notoriously hungry Fenix, I have no issues at all flying it, even with my 3 1440p screens rendering 3 windows. I can’t manage to enjoy my A300 with low frame rates… I’ve tried with lights off and on, clearing WASM folder, uninstalling other addons, flying on generic terrains instead of paid …

Requested the winds from Simbrief for my flight plan, and this is what it gave me. They don't match up at all with what's in the flight plan. Note I was using historical weather for this flight.

PW freighter: the emergency exit lights switch is in the On position whenever starting a new flight.

Hello I have noticed today that the W&B manager in the PAX versions of the A300 (upgraded to PREMIUM in the MS2024 Marketplace) is displaying the W&B manager of the Cargo version. As this is the only Inibuilds Airliner product currently working in SU3 and SU4 beta - please fix this issue ASAP as it should be an easy fix for the devs. Please give these older products some love and attention they deserve. Thank you

It was my first time in a few months flying the A300 tonight, so maybe I missed something, but on the approach to 23L at KIND, the LAND light did not illuminate when I clicked it. My PFD did say CAT3 was armed and we did capture the glideslope, so the mode was at least working.

Perhaps this is an MSFS 24 issue, but today when I loaded the plane I noticed it did not load my saved profile for my controllers. After I exited the game and reloaded, I noticed the problem was back.

Hi, Had a wasm crash usually when I'm about to land at an airport. Specifically around turning off AP1 (autopilot) before landing. Unfortunately I don't have a video, but it seems to happen when trying to disengage the autopilot around the decision altitude above the runway. Aircraft is fully set for landing (gear down, max flaps, autobrake set to medium, brake fan on, armed spoilers, land selected on the MCP) I was aware of the same crash when disengaging the autopilot yesterday so turned off ap2 first, still fine (switch moved), then tried to turn off ap1 however the switch didn't move, but i could use the joystick to fly the plane onto the runway. Throttles were …

I really enjoy flying the A300-600 and upgraded to the Premium version so I could fly it fully in MSFS2024. I've found a few minor issues in the current beta version (1.5.9.0) and thought it might be useful to report them. NB: I appreciate iniBuilds won't support SU3 while it's in beta and I don't expect any response, but it might be useful if a dev is currently working on a new release. Final fuel always underestimated - Using the "offical" Simbrief profiles, the fuel warning always comes on before or during descent. Some flights I run out of fuel completely during descent and crash; other flights, there is just enough to make it. This might be a Simbrief thi…

The fms freezed (and whole acft did) while entering STAR GOXLI1R and ILS08R app.

I recently purchased the A300-600R Airliner for Microsoft Flight Simulator 2024 and successfully installed it. However, when I launch the simulator and check the available liveries, I only see two: the default iniBuilds livery and one aircraft. I was expecting more liveries to be included. Could you please let me know if I missed a step during installation, or if there's something else I need to do to access the full set of liveries? Thank you for your help! Best regards,

just tried to fly a300 in 2024 for first time since su2 and with batt on an gpu no powering up at all dark screens IM ON PC

Hi, CPLD seems work well with ACARS bridge (native SI compatible like on the A350 could be better) but when i request ATIS I receive an error message... every other metar request works. Thanks for suggestion. Daniele

IMPOSSIBLE START the fly, the simulator get frozen

I have my Hoppie code entered as normal, but when I try to request weather via the IDC, it doesn't work. The message is sent, but I get no reply.

When powering up the aircraft, Constraint mode is active on the PFD by default.

Out of LEBL ... 1. unable to PreSet V2.. 2. passing FL200, all Displays freezed !! and the plane goes into unusable state.......... Congratulations iniBuilds, after the unusable A350 (CTD, WASM crash ...) you killed also the A300...... 😵‍💫

The default "wing lights on" and "wing lights off" commands are inverted, i.e., On turns them off and vice versa.

I have the same issue as Diegoamd and Silo01 mentioned. Both, the A330 and the A306 (Premium) freeze up the Sim, if one enters the ILS28 approach for LSZH into the MCDU. I tried both, with Navigraph and stock Navdata. The result is the same. It would be great if this issue could be resolved in the near future, as LSZH is the airport I fly into most often.

When entering ILS Y RWY 03, Transition NEDAN for arrival VALA1C, the sim freezes when using the A300. I could reproduce it several times. Greetings Marcus

How do I activate the speed pre set and set function on MCP?

The captain's DH button has to be pressed several times before it will turn green and the player can enter a decision height value.