General Discussion
Thread for general and off-topic discussions.
407 topics in this forum
-
Dear all, Thank you once again for updates to the A340 and A350. I would like to know what is going on with the state of these aircraft. Between them, there have been over 30 updates and yet they still contain so many basic errors, the vast majority of which have been reported since the initial release. We are not talking obscure areas, but rather basic functionality. For example, the F-PLN page, and various PERF pages of the FMS, and corresponding ND symbology on both aircraft are so full of bugs and errors that it seems they have simply have not been tested properly. On every single flight one can find a large array of these bugs and errors. I won't go into d…
-
-
- 1 reply
- 717 views
- 1 follower
-
-
Hi everyone, I have a quick question for the group. Iām flying the A350 in MSFS 2024 and Iām running into a specific issue. I use the Bravo Throttle Quadrant, but the USB-C cable connection is a bit loose. This causes the device to occasionally disconnect and reconnect for a split second. Usually, this isn't a big deal, but in the A350, this brief disconnect completely resets the aircraft state. The engines shut down, the APU turns off, and various switches (like the landing lights) suddenly flip to different positions. Today, my engines cut out during short final on VATSIM, which was a huge problem. Is this a known issue, and is there any way to prevent the air…
-
-
- 4 replies
- 498 views
- 1 follower
-
-
Hello inibuilds, I have done a couple of flights with the a350 sins update .9 and Every single time i do an approach the ils is not working. There is an ils approach in the FMC and my displays are also showing that but there is no localiser or Glide slope. Can you guys please fix this? Thank you ( also please fix the engines so they rotate again and make the aircraft's performance a little better) thanks!
-
-
- 14 replies
- 3.8k views
-
-
After the latest Ini A340 Update , I have red Screens with WASM Warning. I delete the WASM Folder , I Reinstall but everytime I have this Message.
-
- 1 reply
- 378 views
- 2 followers
-
-
šøšøšø
-
- 1 reply
- 539 views
- 1 follower
-
-
Hi iniBuilds team, a high fidelity airport in the Spanish capital could be a very good airport, comparing to other big hub airports that already has a pretty good developer and you guys too! LVFR LEMD is also very outdated by now and the Spanish flyers or even pilots that fly into LEMD can agree and needs and update and why not have the best scenery developer to do it :)
-
-
- 2 replies
- 744 views
- 1 follower
-
-
I just moved from X-plane 11 to X-plane 12 and downloaded the latest A300 for X-plane 12. This plane has some issues but I can“t see any support for this plane for X-plane in this forum. So is this plane no longer supported and abandoned?
-
- 1 reply
- 466 views
-
-
Lufthansa Airbus A350-900 Start Up, Flight Control Check and Flaps ASMR This is a real life flight controls check of the airbus a350, now of course there is no cockpit footage so no sidestick etc. As for in the sim the spoiler deployment and ailerons deflection seems far slower compared to video. Also in the near full deflection on the simulator it slows down considerably in the outer ranges and I was just wondering if this is just how the FBW has been coded or is possibly a simulation limitation or just a flight model problem potentially, which I doubt, or maybe something to do of course with how the simulator as with any game processes these inputs linearly.
-
- 0 replies
- 262 views
-
-
when will a350 see more liveries for xbox users? this is the 3rd or 4th time asking and no response
-
- 1 reply
- 469 views
- 1 follower
-
-
Airarc is Updated on the A340-300 but not showing correctly in the FMS. Reloged Navigraph and Simbrief. Closed and restarted Game x times. No Engines Running, on ground. When init Request, it prints the Right Plan, but the FMS doesnt have it. a350 isnt updating the cycle at all. If I Click Update, it Updates it (downloading) over and over again without finishing it. Thanks in advance and have a Great one
-
- 1 reply
- 628 views
-
-
Hello I noticed my Ini discord was gone and went to join it again without it letting me join I have purchase multiple products from you guys I would like to continue receive support too or maybe the discord link is different now?
-
- 3 replies
- 792 views
-
-
I would like to respectfully request that iniBuilds consider developing the Dash 8 Q400 and Q300. iniBuilds is widely recognized as a team of experts with deep technical knowledge and exceptional attention to detail. Your strengths in high-fidelity systems simulation and industry-leading 3D modeling are well known across the community. At present, there is no truly modern, high-quality Dash 8 Q400 or Q300 available on the market. These aircraft remain extremely popular in real-world regional operations across North America, Europe, and many other regions, yet they are significantly underrepresented in current simulators. A Dash 8 Q400/Q300 developed by iniBuilds wou…
-
-
- 2 replies
- 1.3k views
- 1 follower
-
-
In the a320neo (ms2024) on importing a flight from Simbrief I find several of the waypoints have zeroed co-ordinates (see pic). This sends me to the north pole, adding 1000s of miles to my flight making the route imposible. I tried loading the same flightplan in the FBW a320 and in the stock Tbm930 and the waypoints were fine. I do have a Navigraph subscription, so I tried opening the Navigraph hub and updating the navigation data but that made no difference. Anyone know why it's not working in the Inibuilds aircraft, and how I can fix it?
-
- 5 replies
- 1.7k views
-
-
Hello, I am beyond ecstatic with the L1011 announcement! It is especially cool that you all are adding in support for a wide variety of navigation options. I would really just kindly like to request one option of including the Working Title UNS-1 added as an option. Quite a few L1011s had some shade of Universal FMS systems installed later in their lives. I think that this would be a bit more realistic than the GNS530, not to mention is a LOT easier to operate as a sim pilot in an already busy flight deck. Thanks for the consideration, Rob
-
- 1 reply
- 1.4k views
-
-
I'm not sure if anyone else has this problem, but right after V1 the aircraft takes off like a rocket with minimal sidestick input. I can't pitch the nose down, it only starts an aggressive stall once it runs out of speed.
-
-
- 5 replies
- 1.4k views
- 1 follower
-
-
Hi, I was recently banned from the INI Discord and Iām not sure why. My username is oliverriopel. Iād appreciate it if a moderator could let me know the reason for the ban and whether itās something I can appeal or clear up. Thanks for your time.
-
-
- 2 replies
- 723 views
-
-
Hello, are the A343 passenger, vip and also freighter going to get a crew rest area like the A350? it seems to me its located in the cargo hold which would be neat to have. Or an avionics compartment ? Really enjoying the vip variant here. but a crew rest would be perfect for long haul pax flights. great day to y'all
-
- 1 reply
- 362 views
-
-
Aircraft Version: v1.2.0 (Latest as of Jan 18, 2026) Simulator Version: MSFS 2024 Issue Type: Avionics / Display Logic Description: I am running the latest update (v1.2.0) and the Vertical Situation Display (VSD) is still failing to render the Trajectory Prediction Vector when in Selected Vertical Speed (V/S) mode. The display only draws the FMS Flight Plan profile (the geometric path to the waypoints). It does not show the green trajectory line indicating the aircraft's actual path based on the current V/S input, even when that input deviates significantly from the profile. Steps to Reproduce: Cruise or descend in the A350 (v1.2.0). Select NAV lateral mode and V/S vertic…
-
- 0 replies
- 566 views
-
-
Hello All, Writing to see if there is acknowledgment/ update about various bugs with the a350. This includes the engine blades not spinning, ils, and nav data not being up to date on the fms.
-
- 0 replies
- 379 views
- 1 follower
-
-
I have owned the Airbus A350 almost since its release, and I think iniBuilds has done a magnificent job. However, I have a request: our regional airline, Aircalin, based in New Caledonia, is expected to receive its first A350-900 in 2026. Would it be possible to obtain a livery for this aircraft? I am using MSFS 2024. You will find attached the current livery of our A330neo as a reference model. Thank you very much.
-
-
- 2 replies
- 698 views
- 1 follower
-
-
Hello, after 8 hours and 15 minutes of flight between NWWW and VTBS, this bug appeared. I had never experienced this issue before. I have 561 hours with your A350 on MSFS 2024. I performed an update of the FSLTL Traffic Injector just before the flight. Note that after stopping everything and restarting the game, everything worked normally again. Do you have any idea what might be causing this issue ? Thank you very much.
-
-
- 3 replies
- 1.2k views
-
-
I have a question about why my A350 can't be bound to the Winwing throttle control. I've tried various methods and it's bound, but in the game, no matter what I do, the throttle automatically switches to maximum reverse thrust. It works fine on other scooters, but not on the A350. Can anyone help me? Thank you.
-
- 3 replies
- 802 views
-
-
Hello, I've noticed for a while now that on the approach to RWY 32 some of the photogramic buildings just appear to stop halfway through an estate. I wasn't sure if this was the boundary of the photogramic Leeds scenery or was due to the EGNM scenery ie. flatten area. If it is the latter could this be updated, it's only a small area but very noticeable. Thanks
-
- 1 reply
- 347 views
-
-
After a crash I started MSFS2024 in Safe mode. Then after I closed and started again in normal mode the A350 was no longer available, it was not even visible anymore. Any suggestions how to enable it again?
-
- 1 reply
- 488 views
-
-
I Can't Find The MH60 License Activation Key And There Seems To Be Very Little Info
-
- 1 reply
- 552 views
- 1 follower
-