Hello

Using EFB I can move as expected, both jetways at compatible gates but when Starting boarding with GSX, Jetways are not used because GSX provides the info that there is no jetways . thus passengers are coming by Bus even if in GSX parking position, jetway is active .

Something you need to check to get passengers using this type of jetways with GSX

Thank you

Edited Saturday at 08:23 PM1 day by Dravman91

Hello, a workaround for this is calling GSX and then triggering the jetways to move within the jetway app for the time being, thank you.

14 hours ago, IniJamir said:

Hello, a workaround for this is calling GSX and then triggering the jetways to move within the jetway app for the time being, thank you.

Hi Jamir

What do I do to "call GSX"? Are you referring to "request boarding"?

Thx

John Nesbit

15 hours ago, IniJamir said:

Hello, a workaround for this is calling GSX and then triggering the jetways to move within the jetway app for the time being, thank you.

Hello Jamir

Thank you for the advice and quick reply! I will try soon and let you know. Thank you

17 hours ago, IniJamir said:

Hello, a workaround for this is calling GSX and then triggering the jetways to move within the jetway app for the time being, thank you.

Hi again, it doesn't work as starting GSX for boarding without moving the 2 jetways using the EFB, Bus is still coming with attached stair on the rear as no jetway detected ...

@John N FYI

20 hours ago, Dravman91 said:

Hi again, it doesn't work as starting GSX for boarding without moving the 2 jetways using the EFB, Bus is still coming with attached stair on the rear as no jetway detected ...

@John N FYI

@Dravman91

Hello Drav, not sure if this might help but it solved the problem for me. Go into your GSX settings from the GSX main menu and check the selection next to "disable rear stairs if jetway". That worked for me.

1 hour ago, John N said:

@Dravman91

Hello Drav, not sure if this might help but it solved the problem for me. Go into your GSX settings from the GSX main menu and check the selection next to "disable rear stairs if jetway". That worked for me.

Hello @John N On gate B17, I've checked this selection "disable rear stairs if jetway" in the settings as advised, but then when starting boarding, this selection is removed automatically and bus is still coming with rear stairs attached ...

@Dravman91 oh... uhm.. im not sure then.. i never tested the workaround that @IniJamir advised because i disabled the stairs with the jetways present. Anybody else have any ideas? Hey @IniJamir any further explanation with the workaround please?

EDIT: maybe it has to do with the door assignments in the airplane settings door 1 and door 2?? I saw a post here earlier referencing the door nomenclature, maybe thats it.. see this post at the bottom under the developers section.. it should not be something the average user (ie. me) should have to dig into, but if you know about GSX and understand what the differences in the door 1 and door 2 etc (i sadly do not understand this logic)..

Edited 57 minutes ago57 min by John N