April 24Apr 24 Not sure if these are related, so I'm reporting them together. The GPU will be disconnected on the PFB, but still show as available on the Engineer panel in all phases of flight. I use the GNS530 + the INS for Navigation. The GNS530 for departure and arrival and the INS for the in between flight plan. During the flight the GNS530 regularly reboots. Although it doesn't seem to effect guidance of the AP, it does cause me trouble with BATC and needing to check in again which can add burden to an over stimulated pilot during flight. I did a flight last night and can provide logs if the storage location can be provided.
April 24Apr 24 Staff Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing.
April 24Apr 24 Author 3 minutes ago, IniJamir said: Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing. I'll try to get a video for you tomorrow on my flight. Thank you for the response!
April 24Apr 24 4 hours ago, Madwolf05 said: During the flight the GNS530 regularly reboots. Although it doesn't seem to effect guidance of the AP, it does cause me trouble with BATC and needing to check in again which can add burden to an over stimulated pilot during flight. Just my 2 cent, I have noticed this reboot issue too. Edited April 24Apr 24 by Norwenkel
April 25Apr 25 Author On 4/24/2026 at 12:59 PM, IniJamir said: Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing. Got it via Twitch. I believe it is now a overall power bug that occasionally presents at the GNS530 rebooting. The video should explain. https://drive.google.com/file/d/1EZv14VcGibwGZIoU1Ok1lSAnewZRPanL/view?usp=drive_link
April 25Apr 25 Author On 4/24/2026 at 12:59 PM, IniJamir said: Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing. I also had a trim bug on approach and it showed up prior to securing the aircraft. Clipped that too. It stopped the ILS and LOC from engaging. They'd immediately disengage. https://drive.google.com/file/d/1pvNbIW0-A-VRuO002RSzfBeAk64aREHU/view?usp=sharing
April 25Apr 25 Author I included pictures of the GPU always showing on. I can grab a video from the stream if that helps as well.
April 27Apr 27 Staff On 4/24/2026 at 4:30 PM, Madwolf05 said: During the flight the GNS530 regularly reboots. Although it doesn't seem to effect guidance of the AP, it does cause me trouble with BATC and needing to check in again which can add burden to an over stimulated pilot during flight. I did a flight last night and can provide logs if the storage location can be provided. We believe this may be related to an issue some users encountered, where the electrical generator would briefly reset during flight. This momentary interruption appeared to have a knock-on effect on avionics (GPS/INS/PMS) and other electrical systems. A workaround for this electrical issue has been implemented in version 1.0.4. Please let us know if you still experience it after that update. On 4/25/2026 at 9:10 PM, Madwolf05 said: I also had a trim bug on approach and it showed up prior to securing the aircraft. Clipped that too. It stopped the ILS and LOC from engaging. They'd immediately disengage. https://drive.google.com/file/d/1pvNbIW0-A-VRuO002RSzfBeAk64aREHU/view?usp=sharing Can you please make all your links public? Currently there is no permission to access. On 4/25/2026 at 9:11 PM, Madwolf05 said: I included pictures of the GPU always showing on. I can grab a video from the stream if that helps as well. Hmm, can't repro this. It is correctly illuminating with AVAIL only when GPU is connected via the PFB. Tested both with/without GSX (just to see if it was perhaps forcing it avail). Vrishabh Sehgal ( @Richboy2307 ) Community Team Member & Tester iniBuilds Ltd. | inibuilds.com
April 27Apr 27 Author 2 hours ago, richboy2307 said: We believe this may be related to an issue some users encountered, where the electrical generator would briefly reset during flight. This momentary interruption appeared to have a knock-on effect on avionics (GPS/INS/PMS) and other electrical systems. A workaround for this electrical issue has been implemented in version 1.0.4. Please let us know if you still experience it after that update. Can you please make all your links public? Currently there is no permission to access. Hmm, can't repro this. It is correctly illuminating with AVAIL only when GPU is connected via the PFB. Tested both with/without GSX (just to see if it was perhaps forcing it avail). Thanks for the response Rich! I did download a GSX profile for the aircraft and it struck me that it could be the cause of the issue. Is there a GSX profile included by default, and if so how do I restore the original?
April 27Apr 27 Staff There is no default profile, though we do have an "official" one available in the FAQ section: https://forum.inibuilds.com/forum/744-faqs/ You just delete any 3rd party profile you installed and replace it with this one. Restart COUATL after if sim was running at the time. Vrishabh Sehgal ( @Richboy2307 ) Community Team Member & Tester iniBuilds Ltd. | inibuilds.com
April 27Apr 27 Author 18 minutes ago, richboy2307 said: There is no default profile, though we do have an "official" one available in the FAQ section: https://forum.inibuilds.com/forum/744-faqs/ You just delete any 3rd party profile you installed and replace it with this one. Restart COUATL after if sim was running at the time. I appreciate all the help. I'll try it tonight.
April 27Apr 27 Author 9 hours ago, richboy2307 said: We believe this may be related to an issue some users encountered, where the electrical generator would briefly reset during flight. This momentary interruption appeared to have a knock-on effect on avionics (GPS/INS/PMS) and other electrical systems. A workaround for this electrical issue has been implemented in version 1.0.4. Please let us know if you still experience it after that update. Can you please make all your links public? Currently there is no permission to access. Hmm, can't repro this. It is correctly illuminating with AVAIL only when GPU is connected via the PFB. Tested both with/without GSX (just to see if it was perhaps forcing it avail). The links should be fixed now.
1 hour ago1 hr I'd just like to say in latest version 1.0.5 the GNS unit still power cycles in flight.
Create an account or sign in to comment