GNS530 Power Cycling in Flight + GPU Issues

[Madwolf05]

Not sure if these are related, so I'm reporting them together.

The GPU will be disconnected on the PFB, but still show as available on the Engineer panel in all phases of flight.

I use the GNS530 + the INS for Navigation. The GNS530 for departure and arrival and the INS for the in between flight plan.

 

During the flight the GNS530 regularly reboots. Although it doesn't seem to effect guidance of the AP, it does cause me trouble with BATC and needing to check in again which can add burden to an over stimulated pilot during flight.

I did a flight last night and can provide logs if the storage location can be provided.

[IniJamir]

Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing.

[Madwolf05]

3 minutes ago, IniJamir said:

Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing.

I'll try to get a video for you tomorrow on my flight. Thank you for the response!

[Norwenkel]

4 hours ago, Madwolf05 said:

During the flight the GNS530 regularly reboots. Although it doesn't seem to effect guidance of the AP, it does cause me trouble with BATC and needing to check in again which can add burden to an over stimulated pilot during flight.

Just my 2 cent, I have noticed this reboot issue too.

Edited yesterday at 08:27 PM by Norwenkel

[Madwolf05]

On 4/24/2026 at 12:59 PM, IniJamir said:

Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing.

Got it via Twitch. I believe it is now a overall power bug that occasionally presents at the GNS530 rebooting. The video should explain.

https://drive.google.com/file/d/1EZv14VcGibwGZIoU1Ok1lSAnewZRPanL/view?usp=drive_link

[Madwolf05]

On 4/24/2026 at 12:59 PM, IniJamir said:

Hi, the first one if you can send a video either on youtube or google drive as that will better assist the team. As for the 2nd issue we have been investigating another electrical issue which more than likely is the reboot in flight you are experiencing.

I also had a trim bug on approach and it showed up prior to securing the aircraft. Clipped that too. It stopped the ILS and LOC from engaging. They'd immediately disengage.

https://drive.google.com/file/d/1pvNbIW0-A-VRuO002RSzfBeAk64aREHU/view?usp=sharing

[Madwolf05]

I included pictures of the GPU always showing on. I can grab a video from the stream if that helps as well.