logged Thanks for a great Aircraft - some issues though...

[Wothan1967]

Thank You for the great  L-1011 Tristar 👍
I just made a flight from EKCH to EGSS, which went quite good, considering this was my first flight.
It looks complex, but in the end it's not that hard to manage single handedly.
Three points...
1. VRAM consumption is quite high, giving me the MSFS2024 GPU warning. I don´t have issues with other addons (PMDG, Fenix, FSLabs, Inibuilds: A350, A340, etc..)

2. It would be nice if the setting for the Gross Weight in the Fuels Gauge (Engineer panel GW / Fuel Wt) would run much quicker, or would be set when transferring the Take Off data from the PFB to the Aircraft, like the Take Off speeds.

3. The Pressurisation Gauges on the Engineer station seems inop.

Edited 18 hours ago by Wothan1967

[IniJamir]

Hi,

Thank you for the feedback, I'll pass it along to the team. Thank you

[sprucemouthman]

I would agree with all of this. VRAM consumption is quite high compared to all other "heavy" addons, even running AutoFPS. Even just moving around the cabin, at cruise, triggers the "low VRAM" message, which is unheard of with anything I've flown. Closing the sim between loading the airplane at different airports seems to help quite a bit when starting a flight. The gross weight dial absolutely needs change, and takes forever to set. Sounds and visuals are great. With a bit of love and work it could be improved. EDIT: Also, the pushback seems to take forever to actually start. Not sure if that is a problem on my end though. The paper EFB is awesome.

Edited 12 hours ago by sprucemouthman

[IniJamir]

6 hours ago, sprucemouthman said:

I would agree with all of this. VRAM consumption is quite high compared to all other "heavy" addons, even running AutoFPS. Even just moving around the cabin, at cruise, triggers the "low VRAM" message, which is unheard of with anything I've flown. Closing the sim between loading the airplane at different airports seems to help quite a bit when starting a flight. The gross weight dial absolutely needs change, and takes forever to set. Sounds and visuals are great. With a bit of love and work it could be improved. EDIT: Also, the pushback seems to take forever to actually start. Not sure if that is a problem on my end though. The paper EFB is awesome.

The gross weight dial has a click-spot where you scroll to automatically set the weights to the current aircraft parameters. The other bits of feedback have been noted and will be passed along to the team. Thank you 🙂

[09tir98]

1 hour ago, IniJamir said:

The gross weight dial has a click-spot where you scroll to automatically set the weights to the current aircraft parameters. The other bits of feedback have been noted and will be passed along to the team. Thank you 🙂

That click spot doesn't work properly as far as I can tell. With the aircraft set to LBS and a GW of approximately 316 000 LBS, pressing the click spot set the gross weight dial to 145 000 LBS. It's like the click spot sets the weight in KGs even though the gauge is in LBS

Edited 6 hours ago by 09tir98