Broken ils Xbox a350

[MrCyclone]

Hello inibuilds, 

I have done a couple of flights with the a350 sins update .9 and Every single time i do an approach the ils is not working. There is an ils approach in the FMC and my displays are also showing that but there is no localiser or Glide slope.  Can you guys please fix this? Thank you ( also please fix  the engines so they rotate again and make the aircraft's performance a little better) thanks!

 

[frank_m]

The frequency is wrong. EKCH ILS04L is 110.50, not 110.70.

[MrCyclone]

Ok, i Will make sure it's correct with my next flight and then check again. The fact that that's with Every single airport i have tried so far would be crazy.

Edited 23 hours ago by MrCyclone

[Dimitrios]

I have the same problem it doesn’t caught the frequency automatically like before so you don’t have G/S* vertically or horizontally!!! Only if you put it manually it works !!!have issues with the ILS from v1.1.8 and then v1.1.9!!! 

[MrCyclone]

How do it enter it manually?

[Dimitrios]

21 minutes ago, MrCyclone said:

How do it enter it manually?

Down on FMC where you have the buttons press on NAVAID and then Put the frequency of the runway ILS !!! 

[MrCyclone]

Ok, it works now but i don't know if it is realistic that you have to enter it manually. If it's realistic then they can leave it as it is but otherwise they should fix that.

[Dimitrios]

24 minutes ago, MrCyclone said:

Ok, it works now but i don't know if it is realistic that you have to enter it manually. If it's realistic then they can leave it as it is but otherwise they should fix that.

they know about that issue so they will fix it in time till then we must to put it manually !!!

 

Edited 17 hours ago by Dimitrios

[peiyuanqwq]

Just waiting for next update😂😂😂

[Transair]

I've had this with the PMDG737 then the A350.  It proved to be a Navigraph problem for me at least. 

 

Suggestion: when updating the Navigraph Airac, update the inibuilds 350, PMDG 777 and PMDG 737 via the OIS/EFB - NOT through the hub. 

Edited 10 hours ago by Transair

[frank_m]

18 hours ago, MrCyclone said:

Ok, it works now but i don't know if it is realistic that you have to enter it manually.

It depends on your used Navdata, if the values are correct or not. If you use outdated material, you have to enter it manually. The plane itself works flawlessly. I did a testflight to EKCH ILS04L, and everything was perfect, as well with current Navigraph data as with the simulator data.

So it is up to you and your settings, if you have to enter it manually. Waiting for an update of the plane will not help, since there is nothing wrong or buggy.

Edited 17 minutes ago by frank_m