I've been having this problem since the second-to-last update. My ILS frequency is correct and everything is set as usual, but the aircraft isn't receiving it. And the correct frequency is even listed on the left, but it doesn't work. Does anyone have any ideas or can help me? Thanks.

post a screenshot or an example

For example, I see the 108.7 ILS frequency in the bottom left corner and this is also in the onboard computer but I do not see the NM number there and when I turn on Loc and Approach mode I do not see any Glide Slope

Edited July 28, 2025Jul 28 by JoJo64

Hello,
Do every ILS have the issue or only some ?
If only some, do you have custim sceneries installed ?

Other lead : Can you try to switch your navdata in the EFB, options, 3rd party to som default if you are using Navigraph just to test ?

Thanks.

1 hour ago, Xenon341 said:

Hello,
Do every ILS have the issue or only some ?
If only some, do you have custim sceneries installed ?

Other lead : Can you try to switch your navdata in the EFB, options, 3rd party to som default if you are using Navigraph just to test ?

Thanks.

The problem occurs with all ILS landings, even those where I have no scenery.

Unfortunately it didn't change anything when I switched by 3rd Party.

 

Can you try to clean your WASM folder ?

That might help.

 

 

 

27 minutes ago, Xenon341 said:

Can you try to clean your WASM folder ?

That might help.

 

 

 

These files aren't there for me. I'll try reinstalling the A350.

Reinstalling won't work. That does not delete the WASM folder. You have to find and delete it yourself.

In the Screenshot above everything is fine. If you have a problem, you should post a screenshot from the problem, and not one when everything is perfect. 

14 minutes ago, frank_m said:

Reinstalling won't work. That does not delete the WASM folder. You have to find and delete it yourself.

In the Screenshot above everything is fine. If you have a problem, you should post a screenshot from the problem, and not one when everything is perfect. 

The Wasm folder isn't anywhere. I've looked everywhere, but it's nowhere. And the screenshot was just an example to explain it better.

It can't find the runway. I've tested it with all charts, though. I've also reset the WASM folder.

23 hours ago, JoJo64 said:

The Wasm folder isn't anywhere. I've looked everywhere, but it's nowhere.

There are several WASM folders. You have to find the right one and delete it. 

23 hours ago, JoJo64 said:

And the screenshot was just an example to explain it better.

That is senseless. 

8 hours ago, JoJo64 said:

It can't find the runway. I've tested it with all charts, though.

Is the navdata for the flight plan, the simulator and the plane consistent? 

19 minutes ago, frank_m said:

There are several WASM folders. You have to find the right one and delete it. 

That is senseless. 

Is the navdata for the flight plan, the simulator and the plane consistent? 

Problem solved. Thanks for your help.

What was the solution? Please consider how other users with the same problem could benefit from your solution.

I have the same problem, i don't recieve an ILS signal.

I cleared the whole WASM folder. I reinstalled the A350. I updated the Navdata with Navigraph.

I don't recieve any ILS data. The NAV-Page shows the ILS with correct FREQ and Identifier but the PFD does not recieve info and APPR1 (or else) will not capture any LOC or GS. (Only the ILS Freq is shown on the PFD, like if i don't recieve a signal). I am SU4 Beta.

I did solve my Problem. I uninstalled the NAV-Data from MSFS2020. MSFS2024 now recieves ILS freq. Weird bug.

You are surprised, that a MSFS2020 addon disturbs the MSFS2024? An Addon, which even the provider recommends not to install in the 2024? Really? REALLY?