pmplayer Posted Tuesday at 12:45 PM Posted Tuesday at 12:45 PM Hi guys, That said I realy did a lot of flighs with older builds and the Autoland works realy well, but with this new build it dosent work as before ??? The story begins at around 1500 to 1000ft ( plus-minus ) before the landing Airport runway ( that sayed LOC seems fine ) the GS pointer goes down fast and the AP tries to catch the pointer what brings the speed of the plane up high so the plane goes up and down trying to hold GS what ends in a jumping bag and so the plane hits the runway like a stone and you just can`t do nothing if you don`t shut off AP and AT and handle it your self - but that could be the thing from an Autoland !! I did a same flight wtih a saved build 1.0.10 and had a beautful Autoland, so please inibuilds check that code something is wrong or changed somehow so no normal Autoland can be done with the new build.. If anyone has similar experiences with Autoland please post here - thank you ! cheers 😉
pmplayer Posted Tuesday at 01:52 PM Author Posted Tuesday at 01:52 PM Furthermore I can't believe that such a new airplane needs 150nm at 31000ft altitude (and that with 195.000kg which is almost 100.000 less than max), so I think the climb performance is clearly too weak ! cheers 😉 1
frank_m Posted Tuesday at 06:23 PM Posted Tuesday at 06:23 PM 5 hours ago, pmplayer said: That said I realy did a lot of flighs with older builds and the Autoland works realy well, but with this new build it dosent work as before ??? I just did an Autoland in EDDL without any issues. 4 hours ago, pmplayer said: Furthermore I can't believe that such a new airplane needs 150nm at 31000ft altitude (and that with 195.000kg which is almost 100.000 less than max), so I think the climb performance is clearly too weak ! Decelerated Climb active? 1
pmplayer Posted Wednesday at 09:05 AM Author Posted Wednesday at 09:05 AM 14 hours ago, frank_m said: Decelerated Climb active? Where can we set this ? Thanks.. cheers 😉
Brendan03 Posted Wednesday at 10:10 AM Posted Wednesday at 10:10 AM 1 hour ago, pmplayer said: Where can we set this ? Thanks.. cheers 😉 If you go into your PERF Page, under the CLB or CRZ Tab, you'll see a drop down with THR - CLB or Derated Climb. 1 7800X3D, 64GB DDR5, 4090, Gen5 NVMe 2TB, Gen3 NVMe 2TB, Win11Pro, MSFS2024. Brisbane, Au.
pmplayer Posted Wednesday at 10:15 AM Author Posted Wednesday at 10:15 AM (edited) OK Thank you, found it in the PREF page and this looks normal now to me.. About the Glideslope, what Turbulence settings are you using ( MSFS2020 ) as far as i know there three different one - Normal, middleway and realistic. I am using middleway and i saw on GL path strong and fast changes from the wind dir so could be better on "normal" but with this setting you see almost no wingflex and thats odd.. cheers 😉 Edited Wednesday at 10:16 AM by pmplayer
Chris3DX Posted Wednesday at 11:44 AM Posted Wednesday at 11:44 AM 1 hour ago, pmplayer said: OK Thank you, found it in the PREF page and this looks normal now to me.. About the Glideslope, what Turbulence settings are you using ( MSFS2020 ) as far as i know there three different one - Normal, middleway and realistic. I am using middleway and i saw on GL path strong and fast changes from the wind dir so could be better on "normal" but with this setting you see almost no wingflex and thats odd.. cheers 😉 Don't use the turbulence that is built into MSFS, its broken. Something is fucked with it, so it does weird stuff and plane can behave erratic at times. At least that is what i was told. so i turned turbulence off in MSFS. 1
pmplayer Posted Wednesday at 12:48 PM Author Posted Wednesday at 12:48 PM 1 hour ago, Chris3DX said: Don't use the turbulence that is built into MSFS, its broken. Something is fucked with it, so it does weird stuff and plane can behave erratic at times. At least that is what i was told. so i turned turbulence off in MSFS. OK, thanks, i will try the new 1.1 build with Turbulence off and see if the ILS path goes better than.. cheers 😉
pmplayer Posted Wednesday at 01:13 PM Author Posted Wednesday at 01:13 PM By the way: Turbulence in MSFS2020 does not show off - it says "low, middleway,realistic" so i will try low. So yours ( Chris3DX ) should at least have "low" ?? cheers 😉
pmplayer Posted 1 hour ago Author Posted 1 hour ago (edited) OK, setting on low fixed this issue but to say i can use "middelway" with all other planes ( Fenix, MAX8, PMDG 737 series, PMDG 777 series for example and so you can see the wingflex feature ) inibuilds should have a look on this i would say, on this A350 it should not happen like this because other planes does work OK.. cheers 😉 Edited 1 hour ago by pmplayer
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now