Horrible performance in 1.06 + Keyboard input doesn't work

[turkintheus]

I used to get about 50-55 fps in the air, now i can't get past 35 fps, 20's on the ground. Keyboard inputs only works for a little on the ground, it stops working after takeoff. Never had these issues prior.

Edited March 29 by turkintheus
added media

[MPO910]

Yes. I noticed worse performance with 106 compared to 105 as welll with 9900x3d and 4090 rtx and 64gb RAM. 

20% loss of performance

[Eddie]

Hello,

Thank you for the report. Please try re-installing the aircraft entirely if you haven't already and let me know if the issue persists.

 

[turkintheus]

Will do, thank you!

[turkintheus]

7 hours ago, Eddie said:

Hello,

Thank you for the report. Please try re-installing the aircraft entirely if you haven't already and let me know if the issue persists.

 

Seems to be way better, thank you.

 

Edit: CTD desktop again. I've tried 3 flights with this update and this is the 3rd ctd.

Edited March 31 by turkintheus

[SAN738]

This update has essentially broken the plane for me.

Fully reinstalled at least 3 times. Now I have to clear the WASAM folder each time I load the plane to even get it to load into the sim. I know it's been joked about but are these product updates being property tested or are we actually paying to for the experience of being beta testers?

[Pilot061]

Performance for me has been outstanding, so maybe it isn't to do with the aircraft?

[connorgutziet]

I have yet to be able to fly any inbuilds product in 2024, and there has been no fix whatsoever. I think the business plan is to release products that are 45% complete, and then turn off comments and silence forums that provide criticism. 

[SAN738]

On the hardware side, I'm running an AMD 9800X3D, 64GB of GDDR7 and an RTX 5080; software being MSFS2024 store version, SU1 (no SU2 beta). I've got 20+ years of flight simulation experience and an airline pilot IRL. Based on everything else I'm reading in this forum, I'd put my money on this 1.0.6 update being the culprit.

[SAN738]

30 minutes ago, connorgutziet said:

I have yet to be able to fly any inbuilds product in 2024, and there has been no fix whatsoever. I think the business plan is to release products that are 45% complete, and then turn off comments and silence forums that provide criticism. 

Seriously, I'm getting so fed up with this business model. A thorough beta test would have gone a long way (with real world A350 drivers - enough of this "let's give it to some streamers who fumble through a product they don't understand.. because, free marketing!"). Using the new autosave function, I just tired to reload my latest CTD. Was almost impressed, but AP never could figure out "ALT Hold." Fished around for FL350. Dove down to FL335, then in VS it failed to capture FL350 a second time. OPT Climb, etc. Nothing. Just sat there, content with being 1,500 ft low. Tried to reset FL350 on the PERF CRUISE page. By that point, I was over it.

Edited April 1 by SAN738

[MPO910]

Yes. I have written this issue AND my thoughts about this half baked releases of features at their discord extensively. 

They ask me not to post such things....as it does not help the others with their issues.....

The problem is not my post.....the problem is the way they have decided to roll out unfinished tested products....

[SAN738]

25 minutes ago, MPO910 said:

Yes. I have written this issue AND my thoughts about this half baked releases of features at their discord extensively. 

They ask me not to post such things....as it does not help the others with their issues.....

The problem is not my post.....the problem is the way they have decided to roll out unfinished tested products....

Yup, quick, just get it to market. Fix it later, maybe. 

My thread earlier questioning how the FO sitting in the floor made it through testing was locked and removed. Furthermore, I just noticed my comment above has already marked as hidden and awaiting "moderation approval." Unbelievable... if INI put as much effort into this product as they appear to be trying to control the narrative, we'd all have gotten the product that we paid for. 

Edited April 1 by SAN738

[haza2]

6 hours ago, SAN738 said:

On the hardware side, I'm running an AMD 9800X3D, 64GB of GDDR7 and an RTX 5080; software being MSFS2024 store version, SU1 (no SU2 beta). I've got 20+ years of flight simulation experience and an airline pilot IRL. Based on everything else I'm reading in this forum, I'd put my money on this 1.0.6 update being the culprit.

We are not seeing many reports regarding this, if you would like to put your own topic together with as much detail as possible including other add-ons you are using we will help.

However please have a look at this post 

 

[koelekoen]

I tried the fix described in that post,no luck unfortunately, 7800x3d amd,32gb ram,rtx4070 and it seems these specs are to weak to run this plane? If i'm lucky it gets 18fps (on dx11,not counting lossless scaling). With lossless scaling it hovers around 20 dropping to 14.(with lossless those numbers are double but it's not smooth and stuttery) I don't run dx12 cause it on occasion goes over the vram limit causing camera stutters. Anyone with similar specs that have good experiences with the a350? And if so what settings do you use?