BeyondATC Auto Tune Radio doesn't work

[rhpa23]

When flying with BeyondATC radios are not auto-tuning properly. Sometimes, it works but mostly not.

In their Discord, Dialex informs that "BeyondATC uses regular SimConnect events to interact with all aircraft in the simulator. This means there might be a problem that the iniBuilds team has to solve."

 

 

[sb380]

This needs to be addressed as a high priority for Ini to support sim connect functionality so that they can cater to more use and play styles... 

[Speedbird193]

Agreed, this needs an urgent fix. BATC is a very common add on and it should really work with it.

[frank_m]

The same applies to Sayintention.AI.

[DroneSim]

I noticed this issue with a lot of other aircraft. I’m not sure if it’s directly related to the A350.

[Speedbird193]

51 minutes ago, DroneSim said:

I noticed this issue with a lot of other aircraft. I’m not sure if it’s directly related to the A350.

Never had this happen with the Fenix or the PMDG and BATC have stated on their Discord that it’s due to the way the A350 works. The FBW A380 had the same issue initially until FBW fixed it. So yes, it’s definitely directly related to this aircraft.

[Tripdog87]

I noticed it to, it’s intermittent for me but there is certain frequencies that will auto tune over to and certain ones that don’t.

[rhpa23]

Does anyone know if this issue was fixed in update V1.0.2 ?

[VagnPetersen]

Sadly no. The issue was not fixed in update V1.0.2 😞

[SUB750T]

Agreed need this fix ASAP!

[frank_m]

Today, I have tested the COM1 and COM2 frequency tuning using a Python script via SimConnect. While it worked for inibuilds A320 or A330 flawlessly, for the A350 around 50% of the frequency changes failed. I used the Events "COM_STBY_RADIO_SET" and "COM_RADIO_FRACT_INC_CARRY" in order to set the radio frequency. There is no error message or similar, it just fails.

Edited Monday at 06:51 PM by frank_m

[atlantixyl]

Yep, without it, I have to stay awake for the entire flight to switch frequencies