WASM Crash Report on Touchdown when loading ANS Map

[DLH9KA]

I received the following WASM crash when landing on FBMN RWY 08 (RNAV 08) 

WASM: Exception c0000005 in gauge EFIS in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm

 

Route: 

FACT/19 N0483F410 DCT KODES UZ30 UPV UT916 AVUSA UZ38 DUGPA UT950 IBRIT DCT FBMN/08

During flight I wanted to enter a BTV exit but the ND said that FBMN was not in Database and I entered a manual distance from THR to Exit of 2000m. What I dont understand is why the plane wants to load a map when it said before that the airport is not in Database and then crashes. 

Database used: Navigraph

Steps: 

Load flight in FACT, depart according Route

Plan for an RNAV08 arrival into FBMN via TIBOM

Enter 2000m in the BTV distance because Airport map is not available

Land on RWY08 with BTV enabled

The moment the EFIS switches to Aorport map = WASM Crash

System:

MSFS2020

A350 no cabin V 1.0.1

i5 14600k

RTX4070

32 DDR4 3200 MHz

Win 10

FACTFBMN_PDF_1740902875.pdf

Edited March 2 by DLH9KA

[bucmic]

Have the same when activating ANF on the ground, 1.0.2

[bucmic]

Same again with 1.0.3, WASM crash when starting the ANS. MSFS 2020.

[ekosif]

On 3/2/2025 at 11:25 AM, DLH9KA said:

I received the following WASM crash when landing on FBMN RWY 08 (RNAV 08) 

WASM: Exception c0000005 in gauge EFIS in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm

 

Route: 

FACT/19 N0483F410 DCT KODES UZ30 UPV UT916 AVUSA UZ38 DUGPA UT950 IBRIT DCT FBMN/08

During flight I wanted to enter a BTV exit but the ND said that FBMN was not in Database and I entered a manual distance from THR to Exit of 2000m. What I dont understand is why the plane wants to load a map when it said before that the airport is not in Database and then crashes. 

Database used: Navigraph

Steps: 

Load flight in FACT, depart according Route

Plan for an RNAV08 arrival into FBMN via TIBOM

Enter 2000m in the BTV distance because Airport map is not available

Land on RWY08 with BTV enabled

The moment the EFIS switches to Aorport map = WASM Crash

System:

MSFS2020

A350 no cabin V 1.0.1

i5 14600k

RTX4070

32 DDR4 3200 MHz

Win 10

FACTFBMN_PDF_1740902875.pdf 48.84 kB · 0 downloads

I didn't try the latest update yet but for 1.0.1 and 1.0.2 updates ANF were not activated on touchdown if it is not in the database. One difference here, I was selecting medium autobrake instead of BTV if airport is not in database, maybe you can try to set the autobrake to medium

[bucmic]

11 minutes ago, ekosif said:

I didn't try the latest update yet but for 1.0.1 and 1.0.2 updates ANF were not activated on touchdown if it is not in the database. One difference here, I was selecting medium autobrake instead of BTV if airport is not in database, maybe you can try to set the autobrake to medium

Thanks but I had autobrakes low armed and activated ANS on final to EGCC (in database).

Edited 13 hours ago by bucmic

[ekosif]

22 minutes ago, bucmic said:

Thanks but I had autobrakes low armed and activated ANS on final to EGCC (in database).

Sorry, not sure I got it 100% 😅 but I meant that if airport is not in database, ANF is not automatically activated on touchdown when autobrake is selected as medium. Since the concern is activation of the ANF automatically even though airport not in database maybe it is because BTV is selected. 

[bucmic]

13 minutes ago, ekosif said:

Sorry, not sure I got it 100% 😅 but I meant that if airport is not in database, ANF is not automatically activated on touchdown when autobrake is selected as medium. Since the concern is activation of the ANF automatically even though airport not in database maybe it is because BTV is selected. 

Ah sorry, my fault. It crashes when I activate it manually, so it seems to be a general issue.