March 2, 20251 yr I received the following WASM crash when landing on FBMN RWY 08 (RNAV 08) WASM: Exception c0000005 in gauge EFIS in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm Route: FACT/19 N0483F410 DCT KODES UZ30 UPV UT916 AVUSA UZ38 DUGPA UT950 IBRIT DCT FBMN/08 During flight I wanted to enter a BTV exit but the ND said that FBMN was not in Database and I entered a manual distance from THR to Exit of 2000m. What I dont understand is why the plane wants to load a map when it said before that the airport is not in Database and then crashes. Database used: Navigraph Steps: Load flight in FACT, depart according Route Plan for an RNAV08 arrival into FBMN via TIBOM Enter 2000m in the BTV distance because Airport map is not available Land on RWY08 with BTV enabled The moment the EFIS switches to Aorport map = WASM Crash System: MSFS2020 A350 no cabin V 1.0.1 i5 14600k RTX4070 32 DDR4 3200 MHz Win 10 FACTFBMN_PDF_1740902875.pdf Edited March 2, 20251 yr by DLH9KA
March 13, 20251 yr On 3/2/2025 at 11:25 AM, DLH9KA said: I received the following WASM crash when landing on FBMN RWY 08 (RNAV 08) WASM: Exception c0000005 in gauge EFIS in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm Route: FACT/19 N0483F410 DCT KODES UZ30 UPV UT916 AVUSA UZ38 DUGPA UT950 IBRIT DCT FBMN/08 During flight I wanted to enter a BTV exit but the ND said that FBMN was not in Database and I entered a manual distance from THR to Exit of 2000m. What I dont understand is why the plane wants to load a map when it said before that the airport is not in Database and then crashes. Database used: Navigraph Steps: Load flight in FACT, depart according Route Plan for an RNAV08 arrival into FBMN via TIBOM Enter 2000m in the BTV distance because Airport map is not available Land on RWY08 with BTV enabled The moment the EFIS switches to Aorport map = WASM Crash System: MSFS2020 A350 no cabin V 1.0.1 i5 14600k RTX4070 32 DDR4 3200 MHz Win 10 FACTFBMN_PDF_1740902875.pdf 48.84 kB · 0 downloads I didn't try the latest update yet but for 1.0.1 and 1.0.2 updates ANF were not activated on touchdown if it is not in the database. One difference here, I was selecting medium autobrake instead of BTV if airport is not in database, maybe you can try to set the autobrake to medium
March 13, 20251 yr 11 minutes ago, ekosif said: I didn't try the latest update yet but for 1.0.1 and 1.0.2 updates ANF were not activated on touchdown if it is not in the database. One difference here, I was selecting medium autobrake instead of BTV if airport is not in database, maybe you can try to set the autobrake to medium Thanks but I had autobrakes low armed and activated ANS on final to EGCC (in database). Edited March 13, 20251 yr by bucmic
March 13, 20251 yr 22 minutes ago, bucmic said: Thanks but I had autobrakes low armed and activated ANS on final to EGCC (in database). Sorry, not sure I got it 100% 😅 but I meant that if airport is not in database, ANF is not automatically activated on touchdown when autobrake is selected as medium. Since the concern is activation of the ANF automatically even though airport not in database maybe it is because BTV is selected.
March 13, 20251 yr 13 minutes ago, ekosif said: Sorry, not sure I got it 100% 😅 but I meant that if airport is not in database, ANF is not automatically activated on touchdown when autobrake is selected as medium. Since the concern is activation of the ANF automatically even though airport not in database maybe it is because BTV is selected. Ah sorry, my fault. It crashes when I activate it manually, so it seems to be a general issue.
Create an account or sign in to comment