A350 - FS2024: LOADSHEET not pulling in PAX

[The Fly Guy]

Hello,

When I click on SIMBRIEF IMPORT in the LOADSHEET window of the OIS (aka EFB), it does pull in my fuel load, but it's not pulling in my passengers. See circled areas in attached screenshot. Can anyone help with this?

 

[flying_atco]

Same for me. But as soon as i click on SET ZFW it loads them in. 

[The Fly Guy]

Thanks flying_atco. I eventually figured it out 🙂

[xwind007]

Mine resets back to zero. Doesn’t matter how many times i press set ZFW, it always zeros everything back out. Any ideas?

[DroneSim]

9 hours ago, The Fly Guy said:

Thanks flying_atco. I eventually figured it out 🙂

Can you please share your solution? 🙂

[xwind007]

The OP wasnt pressing “SET ZFW” after importing his simbrief flightplan. Unfortunately this doesn’t work for me as mentioned above. You may have the same problem i do. 

Edited February 28 by xwind007

[Etka]

I have the same issue, it only works if I let GSX board the PAX and baggage

[The Fly Guy]

How DroneSim,

All I forgot to do was clicking the SET ZFW and SET FUEL buttons. Once I did that, all of the passengers were added.

[airsinny]

my issue is that it only loads a subset of the correct number of PAX into FIRST and PREM ECONOMY and FWD ECONOMY etc... the TOTAL (324 / 324 PAX) are correct buy only 25 and 30 PAX in economy.. and 5 / 24 in PREMIUM etc... not sure where all those PAX are.

[ZeeMan90]

Same for me. It seems like I didn't grasp the concept of GSX and Simbrief integration on the A350. If I press Simbrief Import all the numbers show up. GSX also got the Simbrief data. However after boarding 292 PAX the A350 only shows 6 in First Class 8 in Premium, 40 in FWD and 48 in AFT Economy. That gives me a total of 102. Even if I add the crew it is not nearly 292 PAX as shown. 

Looking forward to any advice besides ignoring GSX and just importing the Simbrief data and applying them by pressing SET ZFW and SET FUEL.

 

Best Regards

 

Edited March 16 by ZeeMan90

[Kaji]

The Loadsheet is generally a broken mess atm, nothing it show is the case in terms of whats actually being loaded. If you click set ZFW specially while not using simbrief the number of pax it loads are far from realistic or accurate for the ZFW figure you enter. MZFW is wrong since launch on the A35K, not sure about the 900. 

Edited March 16 by Kaji

[ykeyre]

 

On 3/16/2025 at 2:18 PM, Kaji said:

The Loadsheet is generally a broken mess atm, nothing it show is the case in terms of whats actually being loaded. If you click set ZFW specially while not using simbrief the number of pax it loads are far from realistic or accurate for the ZFW figure you enter. MZFW is wrong since launch on the A35K, not sure about the 900. 

Inibuild devs could take some inspiration from FBW A380 EFB and see how well the PAX/ZFW load manager works. There is significant room for improvement with the load manager. For example, you should be able to select which seat is occupied by a passenger and have it dynamically effect the CG balance.  Also, I'd love to see additional visual illustration, e.g. showing how much of each cargo area is being utilized and its effect on CG/THS

 

 

Edited March 17 by ykeyre

[haza2]

On 2/27/2025 at 5:03 PM, The Fly Guy said:

Hello,

When I click on SIMBRIEF IMPORT in the LOADSHEET window of the OIS (aka EFB), it does pull in my fuel load, but it's not pulling in my passengers. See circled areas in attached screenshot. Can anyone help with this?

 

Are you still having issues? Kindest.