Final APP mode not activating in RNAV procedures

[Pxdriinnnn]

 Since the last sim update, I have had problems performing RNAV and RNP approaches. When activating APPR mode, the Vdev indication appears on the screen but it is not activated. Following the image below, it is possible to see that the mode is selected, I am on the final approach, aligned with the runway and the final app is not activated. The V/dev just passes by my altitude but it is not captured

[BoeingSpeedbird]

Did you activate approach phase in MCDU and make sure flight plan is sequenced?

[Pxdriinnnn]

Yes sir, the approach phase was activated, and the flight plan was sequenced correctly. I tried 3 other airports in Brazil and got the same issue 

 

[BoeingSpeedbird]

I only ask as there are some videos of approach mode being activated but not approach phase. 

[Azlog]

I've noticed this as well that the A20N v2 just won't follow RNAV approaches on APP mode. It flies straight through the vertical path and doesn't descend. No issues before the last update that broke the cockpit lights

[Harry.pocher]

Hello, first of all...i love the A320 Neo! I spend so much time with this aircraft in MSFS 2020!

But same probleme here. On an RNAV Approach i armed the "APP" before i pass the FAF. The V/DEV is shown correctly but at the FAF Point (V/DEV is on the marker) the aircraft doesnt sink with the correct descend path (3°). The airplane fly straigth ahead on the last constraint-height (3000ft). I checked the MCDU, the constraints and descent-path is correct in the database.

Here are the conditions:

EDDP, RW26R, RNAV26R, FAF KOSAM

I tried the RNAV approaches on different airports, everytime with the same problem.

I hope you can fix this error.

best regards

Robert

[Azlog]

Exactly how it is for me. APP NAV and FINAL in blue should change to FINAL APP in green and follow the purple rectangle but it doesn’t. Also got a problem with the A300 RNAV since the last update but that is for a different thread