edaaaaaali123456 Posted February 4 Posted February 4 Since update 1.04 every time I try to start my takeoff roll the aircraft yaws heavily to the right. I have to input almost maximum left rudder to counteract this until it disappears as the aircraft speeds up. I have this at a variety of different airports in different wind conditions. I don't have this with any other aircraft, and have checked my control calibrations, bindings and sensitivities so I don't think it's a problem with that. I didn't have any problems before the latest update so I'm leaning towards it being a bug, but I know I could be making a mistake somewhere along the line that could be contributing towards this! Any help would be much appreciated. Thanks
Crabby Posted February 4 Posted February 4 Cannot re-create on my set up. Mark "Crabby" Crabtree AAL311 | PHL I7-9700KF | 2070 Super | Honeycomb Alpha/Bravo | MFG Crosswind
SUNBREEZE Posted February 4 Posted February 4 (edited) I had a similar problem. In my case I had activated the AP1 Edited February 4 by SUNBREEZE
Xyzan Posted February 4 Posted February 4 I don't think you should activate AP (auto pilot) before beeing in the air. Maybe AP is trying to do the turn?
edaaaaaali123456 Posted February 4 Author Posted February 4 I didn't turn the autopilot or any nav/heading modes on before I got in the air, so I don't think it's that. Whats weird is I tried it again earlier today and it seemed normal, I had a bit of a crosswind from the left and the aircraft yawed to the left so I inputted a bit of right rudder and it was fine, but before I definitely had a few times where the wind was coming from one way and it yawed in the opposite direction without me doing anything with the rudder which is why I thought there was something wrong. Either way I'll keep an eye on it and hopefully it's resolved itself. Thanks for the suggestions though.
Recommended Posts