throttle keep moving to reverse thrust once put to back to idle. on thrustmaster airbus throttle. i have done throttle calibration  

I had the same issue. I fixed it by pulling the throttles a bit further back when calibrating the IDLE Position.

I have the same issue, i tried to set the Idle Rev. futher away from Idle, but it doesnt work for me. Everytime i set idle, it jumps a bit into the reversers.

Edited December 29, 20232 yr by Maverick_2000

Mate,

 

if your using the same profile for another plane that would be why your reverse thrust is off. In order to eliminate that problem you need to reassign a new profile, rename it and recalibrate it to only the A300 settings. That worked for me. 

I tried a new profile and didn't work for me.

 

Same issue. Recalibrated many times so that idle reverse is much closer to max reverse.

When at idle the engines show slight reverse doors open, no matter how I calibrate.

having the same issue here 

Same for me. I used a new profile, assigned several times to my TQ6, it always moves some degrees to reverse

Suffering this same issue using my airbus tca throttles 

Same here except using ORION HOTAS 2.