HBZUG

I have tried to start a flight for three times now after updating to v1.1.9, but didn't get past GSX pushback. Neither chocks, parking brake nor pedal brakes work, the airplane starts rolling with no engines running ... Using MSFS 2020, uninstalled and re-installed A350, no change

Thanks for the Info Eddie, looking forward to the fix ...

I use P2ATC for ATC. It features options like *Copilot Auto Tunes Radio" and "Copilot Auto-Responds". This works on all my airplanes, but does not autotune the A350 radio. Only after tuning the radio manually the copilot does respond. Especially during a long-haul flight you don't want to sit in front of your PC for hours and hours in order not to loose radio contact! Unless I miss something It looks like A350 radio inhibits interaction with some 3rd party software. Maybe there is a workaround, or else there could be an option introduced in the flight tablet menues?

I didn't change anything on the MSFS keyboard settings. Did the update yesterday, deleted the ini file and WASP files and started a new flight. Hit the new red reset button on the EFB calibration page and did the calibration without any problem. IDLE is now at 22% and all other settings are correct. F3 working fine for taxi.

Issues resolved with update 1.0.5. Everything fine!

MSFS 2020 > Controls Options > Keyboard > Power Management > Throttle Throttle Cut F1 Increase Throttle F3 Full Throttle F4 Decrease Throttle F2 Works perfectly on all my airplanes, but on the A350 only erratically (similar problems as Top27, like going full throttle when hitting F3 once to start taxiing). I’m unable to adjust incorrect power settings in Throttle Calibration, tried everything. Absurd values for idle in the ini file: [throttle] reverse_on_axis = false [axis_1] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.950000 idle_max = 1.000000 climb_min = 0.975000 climb_max = 1.025000 flexmct_min = 0.975000 flexmct_max = 1.025000 toga_min = 0.975000 toga_max = 1.000000 [axis_2] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.950000 idle_max = 1.000000 climb_min = 0.975000 climb_max = 1.025000 flexmct_min = 0.975000 flexmct_max = 1.025000 toga_min = 0.975000 toga_max = 1.000000 I corrected values manually, based on richboy2307’s recommendations for keyboard and DZ of 2.5%: [throttle] reverse_on_axis = false [axis_1] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.195000 idle_max = 0.220000 climb_min = 0.475000 climb_max = 0.500000 flexmct_min = 0.725000 flexmct_max = 0.750000 toga_min = 0.975000 toga_max = 1.000000 [axis_2] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.195000 idle_max = 0.220000 climb_min = 0.475000 climb_max = 0.500000 flexmct_min = 0.725000 flexmct_max = 0.750000 toga_min = 0.975000 toga_max = 1.000000 After doing these corrections I started the simulator again, result on the EFB Throttle Calibration page: IDLE 50%/50% CLB 75%/75% FLEX 88%/88% TOGA 100%/100% I just checked the values and did not save anything. Pulling the throttle back to idle, the IDLE setting has increased to 60%/60%. Throttle Calibration is ignoring all changes made in the ini file. Even though I occasionally see a hand (mouse over) it is not possible to change any setting. Next I close flight and sim to check the ini file again. It is identical to the corrections I had made above. Obviously there is no connection between the ini file and the sim. I’m at a complete loss and can only hope for help … Thanks!

MSFS 2020 > Controls Options > Keyboard > Power Management > Throttle Throttle Cut F1 Increase Throttle F3 Full Throttle F4 Decrease Throttle F2 Works perfectly on all my airplanes, but on the A350 only erratically (similar problems as Top27, like going full throttle when hitting F3 once to start taxiing). I’m unable to adjust incorrect power settings in Throttle Calibration, tried everything. Absurd values for idle in the ini file: [throttle] reverse_on_axis = false [axis_1] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.950000 idle_max = 1.000000 climb_min = 0.975000 climb_max = 1.025000 flexmct_min = 0.975000 flexmct_max = 1.025000 toga_min = 0.975000 toga_max = 1.000000 [axis_2] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.950000 idle_max = 1.000000 climb_min = 0.975000 climb_max = 1.025000 flexmct_min = 0.975000 flexmct_max = 1.025000 toga_min = 0.975000 toga_max = 1.000000 I corrected values manually, based on richboy2307’s recommendations for keyboard and DZ of 2.5%: [throttle] reverse_on_axis = false [axis_1] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.195000 idle_max = 0.220000 climb_min = 0.475000 climb_max = 0.500000 flexmct_min = 0.725000 flexmct_max = 0.750000 toga_min = 0.975000 toga_max = 1.000000 [axis_2] reverse_min = -1.000000 reverse_max = -0.950000 reverse_idle_min = -0.850000 reverse_idle_max = -0.750000 idle_min = 0.195000 idle_max = 0.220000 climb_min = 0.475000 climb_max = 0.500000 flexmct_min = 0.725000 flexmct_max = 0.750000 toga_min = 0.975000 toga_max = 1.000000 After doing these corrections I started the simulator again, result on the EFB Throttle Calibration page: IDLE 50%/50% CLB 75%/75% FLEX 88%/88% TOGA 100%/100% I just checked the values and did not save anything. Pulling the throttle back to idle, the IDLE setting has increased to 60%/60%. Throttle Calibration is ignoring all changes made in the ini file. Even though I occasionally see a hand (mouse over) it is not possible to change any setting. Next I close flight and sim to check the ini file again. It is identical to the corrections I had made above. Obviously there is no connection between the ini file and the sim. I’m at a complete loss and can only hope for help … Thanks!