mseder
-
Posts
66 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by mseder
-
-
With the V1.0.11 version things seem to work! Congrat!
Is it possible to configure wheter catering should be included in the boarding or not?
Mats
-
Check out your options in the EFB, In the aircraft-section you should set "rudder ctrl tiller" to YES
-
Thanks for the attention
- Regarding versions, you'll find all that info in my previous post
- The Clear-Wasm-folder link is only valid for MSFS2024 and offers no help for MSFS2020 users.
see my comment in this MSFS2020 thread and please come up with some working instructions on how to clear the WASM
From the "developer mode" console this is the WASM error I found:
WASM: Exception c000001d in gauge EFIS in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/inibuilds-aircraft-a350-900/panel/inibuilds-A350.wasm
So maybe there is someting I should do regarding the "inibuilds-A350.wasm" file. It's 53000 kb. Delete it or???This doesn't seem to be a generic problem, I'm flying the A350 pretty frequently and this kind of situation almost never occur .
Could there be something weird with that specific airport and scenery SKBO by Double T?So what remains for me to do, only to reinstall?
-
Hi
Was trying to insert an arrival route towards Bogota SKBO, 14L when the FMS just went into "pieces".
The FMS stopped responding when I clicked on the insertion of the arrival route. Also see Nav display to the left, see pic.
Also the EFB went into a paradox state with auto compression turned off but still in a 4X, see pic.
The plane was still flyable.
MSFS2020, latest version 1.10
Mats
-
Did just check it.
What i did:
GSX transfered to the EFB
Loadsheet imported
GSX Load clicked
Result:
Fueling ok
No boarding happened at all
Had to initiate it separatelyConclusion:
The uncertainties remains.
-
"I'll get back if it gets back"
And now it's back with v1.10
MSFS2020 -
Now version 1.10 for A350 and the GSX mess continues, I thought it would be looked over by now.
I have completely abandon GSX involvement in the EFB and so an essential and promising functionality is lost.
Are there any plans to recode and get this working?See
Mats
MSFS2020 -
Now version 1.09. and the GSX mess continues, thought it would be looked over by now.
I have completely abandon GSX involvment in the EFB.
First the Load with GSX turned out to not work propely, sometimes it involved fueling, sometimes not. And the sequence got wrong as well
Then I chosed to separataly involve refueling and boarding from the GSX menu (in the EFB). That turned out to not work properly either not seldom, fueling never happens.
So now I run GSX without any A350 EFB invovment and then it's controllable.
Any iniBuild plans to have this functionality working?
AND I'm using MSFS2020
-
This shows how iniBuilds has turned off several AI funtionalities, they are grayed out
-
-
That link is unusable and has been all the time.
There is no work folder or files of the type mentioned in the inibuilds-aircraft-a350 folder.
That "help" should be updated as it do not work and only adds more confusion. -
Leaving the plane and then just changing aircraft (B777) shows below toolbar with the Flght assistant choice available.
-
and if selecting the tools choice you'll find Flght assistant grayed out and not selectable -
On 4/30/2025 at 9:56 AM, AnkH said:
plane and airport stop positions can be defined only on the basis of the info from the plane.
Well that's what I meant. The GSX configuration is a factor here. But if you find that the GSX reposition gives different results at the same gate without changes in GSX airport config or GSX aircraft config then there is something weird
On 4/24/2025 at 8:54 AM, AnkH said:And it gets placed initially pretty ok.
Well that is the MSFS idea of where to park the plane. A GSX reposition is GSX's idea.
-
FLight assistance is blocked by iniBuilds A350, why?
-
Isn't the position decided in GSX and airport confiuration?
-
Disregard previous post
-
Well suddenly it seems to work without any updates in between. Can't explain it.
I'll get back if it gets back
MSFS2020 -
Well suddenly it seems to work without any updates in between. Can't explain it.
I'll get back if it gets back
MSFS2020
-
"Just request refuelling and boarding in GSX, then Fuel, Passengers and Cargo is added without any further action."
Yes that works but then the new functionality in v1.0.7 using the "load with GSX" choice is disregarded -
"might be due to the fact you still got your park brake on,
Yes and that's why in my post wrote "and releasing the P Brake makes no difference" -
The GSX integration procedures should be updated in the doc. But the documentation is not updated with the latest updates, like v.1.0.7
The GSX mess needs structure and a guide simply.
AND...I'm running MSFS2020 -
ADMIN!!
Maybe this topic should be moved to General discussion (Hmm I thought I put it there initially) or something
Now it's under the MSFS2024 thread and as posted, I'm running MSFS2020 -
Holding down the TO Config makes no change
I set the panel stage into Take OFF State, lined up at the runway, ensured everything was set for TO , pushed the TO Config button and held it down.
What happens is that I hear a beep and then the Clear button lights up but the TO Config: TEST message never turns green
Se images (couldn't though catch the clear button light up in white) and releasing the P Brake makes no difference
MSFS2020
A350 Refueling-Boarding-EFB-GSX What is the correct sequence?
in Other
Posted
With ver V1.0.11 the GSX Load button initiates Refueling, then Catering and Boarding which I uderstand is the correct sequence.
Maybe case solved