Fornax

Well, I am able to set V2(turn knob V2 speed changes, Mcp speed stuck at ---), or any speed in-flight. It just the Mcp speed indicator is stuck at ---. Also default iniBuilds livery FedEx.

I had this pre 1.0.3 as well. Make sure you load the FPL into the EFB before setting ZFW. It might not be related, but I have not ran into this problem if FPL is loaded first.

Yup. All on. Same procedure as pre-1.0.3.

Yeah, shows speed in PFD (not ND as I wrote 😉)

Trying to set V2 speed in MCP. I can turn the knob, but the MCP doesn't show the speed, stuck at ---. It does update speed in the MCDU though. If I select PreSelect it shows set speed. Same when flying, HDG mode, V/S, trying to set speed: shows ---. The speed bug changes in the ND as I turn the knob/using "set speed bug" keybind. So it is flyable, just it won't show selected speed in MCP.

Thats what Im trying to tell you: There is no pop-up page. Type ex 250/10000 and THEN press the right button where you want to isert the restriction...

I presume thats because you have to INSERT the (revised) restrictions in th correct format. Not just press the button... Like /18000 or 250/10000 etc.

Had some good flight with it now. Bangkok-Hanoi - she behaved very nicely. Generally I feel I have better control of her using LVL/CH initially during departures. Using PROFILE she wont follow level restrictions on SIDs (as the real plane afaik). Also at one airport (was it Haneda(RJTT)?) there was no speed restrictions on departure, so in PROFILE she wanted to accelerate to 315ias at 2000ft. So I usually keep her in LVL/CH to 10000ft/clear of restrictions - better control of speed + restrictions imho. On arrival she followed the restrictions on the STARs/approaches I tried (PROFILE-mode) 👍 Well done. On one flight KMEM-KMCI the Prog page was stuck in CRZ-page. Refused to show DES. This was after changing CRZ alt 3 times. Dunno if that influenced it... Otherwise a good (latest)patch! Sounds, flare(much better now), idle thr 👏👏

How do I edit this thing...;) Another Q: When in NAV + PROFILE mode: if I try to set speed manually in the MCP Im unable to activate the rotary. Stays at ---. Pressing down on the knob. Nothing happens. At work now, but think pressing up had the same unavailability to select speed. At some point it suddenly works again. I guess you should be able to select speed manually in PROFILE mode? Or you have to use V/S?

Loaded SNSHN SID via LAS RWY26R. In NAV and profile mode. At LIVVI the A300 continuous straight ahead, missing the XBBOX WPT. A DCT TO fix fixed the problem. At KSLC I decided to try the RNAV 34R via QWENN 5 STAR via MLF. The FMS didn't even show the QWENN STAR as an option. Inserted the WPTs manually. For the RNAV approach I could not the the plane to descend correctly. Was level before CHEVL (FAF) LVL/CH+NAV and press PROFILE (MCP alt to 6100ft). It would not catch the glidepath. Then MA and tried to set MCP altitude to minima. Again LVL/CH and press POFILE mode before CHEVL. Still not catch the glidepath. Is this correct procedure for an RNAV APP? Thought it was the same as the A310. Not press LAND? A300 freighter. PC. DX12. FedEx livery. Using NAVIGRAPH, so not sure if the missing STAR problem lies with them.