Matteo Spacca

Good evening, Today Navigraph released their AIRAC cycle for MSFS2024, I loaded in the A330 but I can see that the airac is not loaded and the aircraft sticks with the default MSFS24 database. Is there a workaround for this? Matteo

Same here. Sometimes all ok some others stutters every second. I does not depends on location. Tried EDDP with the PW Freighter. First flight stutter second and 3rd all fine...today stutters every second again. 4090 + 7800X3D

Same for me the first time I loaded in. After restart I did’t have the issue anymore Matteo

Hello. Is there a way to solve this? My entire flights are inside the captain head. I did not find a way to remove the avatar Matteo

I picked the A300 for the Vatsim Cross the Pond next Saturday.....multiple fingers crossed. BTW @iniBuilds this product is amazing.....but this falling out of the sky/fuel/unrecoverable failures have been there since Day 1. Matteo

Same here. Sometimes it crashes MSFS, sometimes the aircraft loads completely dead. If this happens just load another aircraft and then load the A300 again.

40% then TOGA button. It happens randomly...I'll try to record takeoffs and post the results if it happens again.

Hello everyone. This is the second time I have this issue. Both times taking off from EDDP. Just after rotation engines throttle down and a/t disconnects. I have to manually apply full trust and re-engage auto/t + NAV + Profile. Anything I can check? I have more then 50 flights with this bird but it looks strange that same issue only twice at the same airport

ROUTE ID: DEFRTE EFHK/04R VALOX4C VALOX Y117 ROSAX DCT PIMEX P739 DEREX DCT GORPI Z80 TILAV L87 PESEL DCT RAKIT M725 OBANI Z36 BEBKU T950 LUXBO LUXBO1V EDDP/26L It did not follow the initial LNAV path in 3 different attempts in 3 different versions V.1.0 V1.03 V1.08 No issues with other airports

LNAV works for me 90% of the time. Easy test to reproduce Take off from RWY 04R at Helsinki (EFHK) on the VALOX 4C departure. The aircraft would not follow unless you give it a DIR TO after rotation. Instead of flying to the first fix he wants you to bank to the left immediately. I had this issue since first version. @iniBuildscan you also have a look? Matteo

V1.07 is out...let's try..Finger crossed

Hello @iniBuilds When can we expect version 1.07? I’m asking because of the vertical speed bug that resets every 1000ft or so. I’m also affected by the “aircraft falling out of the sky” issue but the vertical speed bug is a no go for me. It’s been almost 2 week now. Thanks for the info and for the amazing plane Matteo

@iniBuilds any chance to fix this? No issues before 1.0.6 or anyway to revert to 1.0.5?

Same here

Yep. Same here. Vertical speed resetting to zero every 20/30 seconds

I believe @iniBuilds said that a possible fix would have made it for 1.06 or 1.07 so let’s wait for next update. I had no problems for the last 5/6 flights but experienced several fall out of the sky in the past version. I can tell that no many users are complaining in the last weeks so I’m wondering if the issue is solved for someone

Can't you just add your desired fuel qty from the EFB? It takes less then 10 seconds Matteo

V1.0.4 is out. Let’s try it out guys and report if problem persists

@iniBuilds Team did you guys figured something out? Matteo

I will try to reproduce and pay attention to the fuel QTY Matteo

In my cases the A300 completely died. Dead as death. Vertical fall with no engines and no avionics. Like in a cold and dark state

Ryzen 7 7800X3D ( not overclock no tweeks) Asus ROG B-650 A-Gaming Rtx 4090 32 GB DDR5 6000mhz ( no expo profiles) GSync Monitor running 60hz with vsync on in nvidia CP and off in sim TAA + Frame Gen Apart from 3rd party airports + Fenix + PMDG no other addons installed All drivers including bios and chipset are up to date. With V1.0.3 experienced the issue twice out of 9 or 10 flights Matteo

I don't. No Navigraph (i use my ipad), no FSUIPC, no GSX, no FS Realistic All AMD CPUs? Matteo

I would like to help but it happens super randomly and cannot reproduce. I experienced this issue 2 times with V1.0.3 out of 10 flights. Last time after a 3 hours flight decending into KSFO at 15000ft (BDEGA3 arrival between BGGLO and LOZIT) I tried to reproduce flying the exact same route at the exact same time with the same fuel and payload but flight went ok. I was flying at night and 2 seconds before the aicraft went completely dark and fell vertically on the ground i noticed some blinking on the instruments as all the avionics shut down and turned on again after a millisecond. Then all went dark and aircraft fell vertically. It was like hitting and invisible wall. I know it is hard to sort a bug that apparently only happens to few but It would be nice if inibuilds would tell us how we can help to figure this out. I'm not using FSUIPC and not using addons other then third party airports. Also nothing wrong with temps or memory. I will try to disable stress damage form the MSFS options as someone suggested in a prior post and see if I still have the issue. @iniBuilds Team let me know is there is something I can do to help sort this out. Matteo

Ok. Same thing here. Approaching KSFO after a 3 hours flight. At 15000 feet the aircraft completely shuts down (engines and electric), goes completely dark and crashes on the ground. Please solve the issue ASAP Matteo