Oliver Gibbons

Dears, Any plan to integrate simbrief? It is really slow to load a FP manually in the 530 and if you flight on vatsim it breaks the immersion that you have to go back to the menu to import or load a new FP to do another leg. I think you did promise that you will integrate simbrief 🤔👀

Dear Ren, You absolutely nailed it! That was exactly what was happening. I tried what you said and when switched back into the cockpit, the autopilot came back to life haha. Thank you for your help! (I am still convinced that they have to modify the trim for a more smooth and precise flight)

There is.. please tell if you do not understand and i will try to record a video from take off to cruise level but this time with the screen recorder

I actually tried to upload the video here (I've recorded with my phone) but the max file size it is only 8 mb.. Is it ok if I send you a YouTube link? I have tried all the methods you told me but nothing really fix it. The last thing I could try is to re-install the sim but I dont know how this could solve the issues. The An225 is the only aircraft that has this problem, all the others native or add ons work without any issue. The only add ons I have in my Community folder are aircrafts, FBW traffict and Airports. I thought the matter was the FBW traffict that has changed something but I have uninstalled it and nothing changed.

any news? I need a solution as i can not longer complete a flight with it.

Dear, I tried the way you said (disconnecting the hardwares) and also running the sim with the Community folder empty but the issues still there. I also tested it with the Modern Flight Model mode and guess what? The plane is a lot better with this Mode, the issues still but they are not that bad as they were with the other flight model. In my opinion.. the cruise altitude issue is due to the trim sensitivity plus the strong winds. The AP is slow to react to the altitude changes produced by the winds and the trim has to much sensitivity to do small or soft corrections. This could be solved by giving her a little bit more trim to play with and also reducing the effect to the plane. The plane not following the route or drifting from the path is due to a bug with the AP or the GPS. Could be that the AP is slow to react or "fell asleep" or the GPS not working properly after sometime. What else we could try? I will record a video tonight to show you the situation.

I have the same issue with the Cruise Altitude and the take offs. It is impossible to do a full flight as the plane starts to climb and descent like he is facing an hurricane. In my case, the plane also starts to drift from the Flight Plan and do not follow the route anymore. Take offs are very rare, I was expecting the physics to be something similar as a fully loaded 747. But the plane is very hard to keep In the center even with 3 knts winds. (I found my cessna 150 less sensible to the winds haha)

Dears, I do not know what is causing this issue but I also have all the assistances turned off. The Flight Plan it is correctly loaded from In Game FP and honestly its fine until I reach my cruise level. After that, the plane starts to drift and do not follow the route correctly. I thought it was that the plane it is very sensible to the winds (too much for me) but I found that it does even with 0 knt wind. It is impossible now to do a full flight for me and It is a shame because I really liked it. I need a solution:(

Dear, Sorry for the late reply, I was on a trip. I have all the assitances off and I also re-installed the plane but the issues are still there. What can I try now? 😞 Thanks,

Dear, I just tried with the AT on and still have the same issues 😞 Do you think a re-install will fix these issues? Could it a problem for me only? What else I could do to fix it? thank for your support so far!

Dear, Sure, here they are: They are in sequence, first how I had the AP configured and the at the Top Left, how the plane started to drift. Also you will see the altitude issue that I mentioned before (Watch the VS) FL280: The AP contanstly trying to go back to the path Cant maintain the altitude, the VS is -1200 but then started to climb up again

Dear, Sorry for my bad english but it is not my native languange. The version before 1.0.5. was working fine and I did not experimented any issues regarding the AP. After this update I started to notice that the AP do not follow the planned route and also do not maintein the selected altitude. I think the altitude matter is due to the aircraft being to sensitive to the winds. (That is another thing that I want to highlight. Do I have to create another topic for it?) Ending.. The issue is that the AP does not follow the route or maintein the altitude after you reach your cruise altitude or maybe after a few minutes after engaged it (? Do you need me to provide some pictures or maybe a video about this? Thank you,

Dears, Please note that the AP is not working properly after the last update. After take off, when you are climbing, the AP works how it is supposed to do so, but when you are about to reach your Cruise FL, the aircraft stop to follow your route and/or does not maintein the altitude. This 2 issues affect the rest of the flight. I used the AP with NAV option to follow my planned route. This didn't happened before tue update. Now it is imposible to do a complete flight. Awaiting your prompt answer