silentghostx

Glad to see improvements on this in v1.0.6 and that LS button now only activates the LOC/GS scale on PFD, and APPR1 only engages after LOC* which is corrects ongoing issues: - Still no FLARE mode on manual landing. - APPR1 should not disappear until the plane has vacated the runway Thanks for the good work!

Just tried v1.0.6 appears to be an regression on this? Didn’t have auto zoom on touchdown with the flight

Hello, On 1.0.5 - After manual ILS landing FMA went from ROLLOUT into HDG and V/S 0 temporarily. I also note the APPR1 mode remains on the FMA when it should disappear after clearing the runway. Thanks for the ongoing improvements. Cheers, Chen

Your screenshots do not show any issues. Did you switch the ignition switch to IGN/START? On the engine ECAM your starters are not running - should be a vertical line through the circle at the bottom

Hi team, Thanks for all the work on the updates. Here are several bugs that I noticed on my recent flights. 1) Cruise page - LDG elevation - this appears to display random numbers? I was approaching NZAA 05R last night, the EFB Landing Calculation Page showed correct elevation at 15ft, however the Cruise status page showed elevation of 70ft. 2) Checklists - Before take off checklist from the CL menu - the T.O. Perf Normal - this displays in green, even though the T.O. Perf check button has not been pressed - this is correctly displayed in blue on the ECAM but on the checklist it's already ticked off as Green. - Shutdown - Fuel pumps off - this displays in green, even though the pumps are not off. Cheers, Chen

Hi Eddie, Thanks to the team for all the hardwork. I bought this addon since day 1 - to be honest the initial release 1.0.0 was the most stable version for me in terms of loading into the game. Since 1.0.3 I've had issues with loading the aircraft into the game, I have cleared my WASM folder with every update as suggested. However it's very hit and miss. I understand the first load does take time, however the subsequent loads should be taking much less which is not what I'm finding on my end except for the initial release. I have the loading circle rolling, and the background music going, but the plane still hasn't loaded for 10-15min now (subsequent load). I'm on FS2024. I don't use AI traffic, I don't have GSX. FB NZAA scenery. Default iniBuilds Cathay A350-1000 B-LXP updated to the latest livery version. Cheers, Chen

WASM: Varget of NAV HAS TACAN in module vfs://inibuilds-aircraft-a350/SimObjects/Airplanes/A350/attachments/inibuilds/Function_Interior_A350/panel/inibuilds-A350.wasm failed with error 0xffffffff Had this one earlier today... feels like after 1.0.3 I've had more crashes. I've reinstalled the whole thing today, and deleted the WASM folder. FS2024 SU1 A350-1000 default iniBuilds livery AMD 7800X3D / nVidia 4090 / 32GB DDR5 No AI traffic. No GSX Frozen on start up - background music still going, the circle still going, after 20min. Have loaded into sim after reinstallation (i.e. not the first time plane got loaded in)

Can confirm this, I was at FL390 with traffic at FL400, TCAS showed they were +24.

Yep had same issue on this! Surely you can get bigger rings in the real aircraft with ETOPS. I think the smaller buses can only do rings up to 256nm

Current work around is ensure your simbrief plan is loaded into the inibuild manager, and exported. I was crashing MSFS every time I loaded NZAA/YBBN, but was ok with all the other airport combos. At the time my simbrief flight plan was NZAA/YBBN, but it wasn’t loaded into the inibuild manager. It will crash MSFS with whichever airport combo you have in simbrief. The current simbrief import doesn’t work for me, stuck on pending when I have my username in.

Hi all Had similar issues - the bindings for the A310 work if you use the throttle axis as “Throttle 0-100%” If you have the Fenix A320 the throttle axis is “Throttle”. It doesn’t work when you have set up it as “Throttle” axis, so save different binding profiles and change it to the “Throttle 0-100%” axis is the way to go here… Cheers, Chen