ROMAN78
-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by ROMAN78
-
-
He's absolutely correct. That is standard operation on Airbus Aircraft. Logo lights come off when airborne and slats are retracted. On descent, they come on as you pass Flaps 2 on the A32X series aircraft and the modern Airbus heavies.In the case with the A300, they illuminate when the flaps are extend pass 15 degrees. That operation you see is normal.
-
Exactly I did what it was supposed to do. You can also manually hard select a specific altitude between the two altitudes. However you observed normal behavior.
-
Hello,
on multiple flights to different airports, The A300 looses ILS signal on CAT3 autoland conditions at around 50-100ft AGL. Not sure why it's doing this but its the only aircraft that does this . Can anyone else confirm this? Thanks!!
-
Correction It may be scenery related. I'll just had a smooth autoland at KMEM. I'll keep testing at different airports and report findings
-
Can confirm this issue. The aircraft definitely veers either left or right at about flare. Hope it gets corrected
-
Same issue on my end. Never seen anything like this before
-
2
-
-
Hello,
Real excited for this upcoming release! Truly epic. However I was wondering if the maintenance simulation could or is being configured per tail number so we could be actual difference in performance/wear per each ship number actual flight/engine cycle hours. Just wondering. Thanks!! Fantastic work!!!
Very Respectfully,
Roman78
-
3
-
-
Cool thanks!
-
Good Morning,
Just wondering how progress was coming along on the A300-600F. Really excited for its release. Thanks and have a great weekend!!
Very Respectfully,
ROMAN78
-
I also noticed that the bridges (A&B) adjacent to the JBU hangar are unusable. The aircraft fall thru both sides. Other than that the update is a lot smoother. Thanks!
-
Hello,
I noticed the interior lights at Terminal 8 Concourse C don't illuminate during dusk/dawn or night. Concourse B is fully illuminated. Not sure if this was just missed after the update. Thanks!
-
Tested again and it worked perfectly
-
11 hours ago, highways1 said:
Hi, really enjoy the scenery but am getting frequent disconnects of the autoland on the PMDG 737 approaching runway 22L. Everything is running fine, I have LAND3 and then about 2.5-3 miles out the ILS disconnects. Happened on 3 out of 4 flights using that runway. Don't believe it's happened on any other runway. Am I missing anything or is that an MSFS issue?
Experienced the same thing after the update. Thought it was weird since it always worked before. I don't think its MSFS issue.
-
Hello,
I remember you guys saying the preview of the A300 would indicate it will be close to release . Just wondering if we're real close. Thanks!
-
Real cool info! I'm really hyped for this release. The A300F is my favorite cargo aircraft next to the MD-11. I hope we get the PW engine variant on release. Really would like to be able to do proper UPS flights from release.
-
9 hours ago, Acktu said:
Very good news, but why not add PW engines? DHL and UPS uses PW not GE. 🤷♂️
I was thinking the same thing! I assume they know especially since the "One the Line" version featured both the Pratt & Whitney & General Electric GE CF6 . Like you said UPS & DHL used P&W variants exclusively with Fedex using both Pratt & Whitney PW 4000's & General Electric GE CF6's. Hopefully it's included just not shown yet. Hopefully, they'll add more info about.
-
Thank you for that progress report. Sadly won't be attended the FSExpo.This is the aircraft I wanted in FS2020 the most. Really excited to see the progress and also the feature list. Time to get those FDX and UPS hub airports purchased and ready. Great Job!😉
ROMAN78
-
Good Morning,
Really excited to see what the "Ultimate Airliner Experience" will feature. Could it be the much anticipated A300F? Could it be other aircraft using the same engine family variant as the 767 or 747. Or could it be a cargo favorite with a similiar MCDU as the MD11? So many possibilities. Either way, I'm real excited. Great job!!
ROMAN78
-
2
-
-
Hello,
With the A300 in development, will it include the Honeywell Avionics upgrade option? Just wondering. Thanks and keep up the good work. Looking forward!
-
No problem really looking forward. Thanks!
-
Good Morning,
Hello iniBuilds Team,
Just wondering if you're at a place where you share any progress on the A300-600F. It is probably the most anticipated aircraft I want to see in FS2020. Very excited to seeing it soon. Ready for those Fedex & UPS routes.
-
7 hours ago, iniBuilds said:
We have some reports, but not too many as a lot of people are following the guidance issued if low perf. The scenery is already pretty efficient (more is being done for Patch 1) but to start off with have you followed our guide of what to do if low perf?
https://forum.inibuilds.com/topic/18864-what-to-do-if-you-have-low-performance/I completely agree. I learned myself that on my system the LOD and object detail sliders were high. I had both around 200. I decreased both to slightly below 100 like recommended by the IniBuilds team and gained additional performance and fps without loosing any real detail. To add I was also have issues running the KDAL scenery and it fixed that issue as well. I also followed this tweak on youtube by 2020 fs'ers which has helped also. Not sure if you use a Nvidia GPU but maybe it may help as well. Hope that helps. Have a great day!
-
Just Imagine! Wow I really hope you guys would consider. Have a great day! 😉
-
2
-
-
Hello,
After purchasing KJFK and most of your other sceneries (KLAX,KSAT, EGLL) I'm wondering what's the chances of your company doing KDFW? 😉 Keep up the good work!! You guys have set a new excellence standard for FS2020 sceneries.
-
2
-
Wierd ILS signal loss still persists during CATIII autoland approaches
in Systems
Posted
Good Morning,
The wierd ILS signal loss is still occuring at most airports whenever flying CATIII approaches and autolands. At about 200ft AGL the ILS signal is lossed and the aircraft either deviates left or right to chase and correct. This is the only aircraft that seems to suffer from it. I've tested with both payware and freeware aircraft and all is normal at each tested airport flying the same exact approach. Please investigate this. Thank you for your time, service and contributions to the FS community.