ykeyre

When BTV is enabled and auto brake is disengaged above 40 knots ground speed, the RA callout for "Auto Brake Off" still missing.

Yup, same here.

De-Rotate is completely broken. It is smashing the nose gear into the runway.

Oh, and remember to delete WASM folder.

Use TAA for antialiasing. If you have the Nvidia App, uninstall it. Go here and repair 2024. Once that's done, clear 2024 cache using this tool: https://flightsim.to/file/92765/msfs2024-cache-removal-tool

@Eddie Please look into this.

As you can see, the "UNITED" sign and United logo are both missing from the front entrance. The "UNITED" logo is missing from the left side and right side of the hangar.

Please see link below for comparison. I am unable to upload screenshots bigger that 8 kB. https://imgur.com/a/rpbkv8N

"REFUEL PNL DOOR OPEN" ECAM memo still not implemented on V1.0.10. @haza2

Agree. Stability seems to have regressed from 1.0.8 to the current version. I used to make 13 hour long hauls in 2024 with A35K. Now I struggle to make it past climb without a CTD or WASM.

Volanta, VATSIM radar, Elevatex etc.

Please fix maximum deflection angle. This information can be found in the FCOM which you already have.

I have the same problem. My hypothesis is a WASM triggered by using ALT + TAB.

So this was a misdiagnosis. The real culprit was ALT + Tab. @haza2 Please close this thread.

I figured out the crash. If you, ALT + TAB and switch to another window, it will trigger a WASM crash during a flight. I tried leaving the sim untouched without switching windows. I kid you not, no more WASM crashes! Try it yourself. I have replicated 3 flights without touching the sim to multitask, no wasm freezes whatsoever! Downside to this, if you have a single display and use Elevatex or Volanta or even Vatsim Vpilot client, you cannot run windowed mode, else that will trigger a WASM. You must use full screen and NEVER switch to another application during cruise, climb or descent phase.

I figured out the crash. If you, ALT + TAB and switch to another window, it will trigger a WASM crash during a flight. I tried leaving the sim untouched without switching windows. I kid you not, no more WASM crashes! Try it yourself.

Go to "Assistance" in settings and set turbulence to low. See if that works.

If you are using SU3 Beta, go back to SU2 in 2024. Avoid opening the Navigraph moving map in OIS. Avoid using WX radar and Terrain radar. Do a flight then report back if that works for you.

Please avoid using this as I have caught it causing a silent WASM freeze. Revert to SU2 which is stable.

I'd like to add another item causing WASM freezes. The WX radar appears to make it run out of memory during severe weather scenarios. So, keep that off too if you are in a harsh weather environment.

I already complained to Asobo. They will add it after 2024 becomes stable.

It is a company option on both Virgin Atlantic and British Airways to automate the use of "No Smoking" and "No Portable Electronic Devices" (PED). Please add a company option and allow removal of these switches to be replaced by automated ECAM Memos.

Please see below and add this. When PAX IFE is being used to play Safety video, this ECAM memo should appear and then disappear before "Cabin Ready" ECAM memo is displayed. It should also appear when a cabin announcement is being made by the pilot or Purser Supervisor, during the 'after-landing' announcement.

So I have done 51 hours of cruising so far without touching the Navigraph OIS map and have not had a single WASM freeze. This is a unique kind of wasm which is not registered in the console. The plane avionics all freeze up. The aircraft tilts 5 degrees to the left-hand side. Navigraph seems to be the culprit here! I've not experienced any FPS drops either. So, you might want to try it out yourself and report back here if my suggestion works for you!

It's a problem with 2024.