Tuesday at 09:22 PM2 days I noticed a possible issue with the maintenance system in A380 v1.0.7.After multiple flights, I noticed that the values on the Maintenance page change for almost all items, except for the Landing Gear section, which remains at 0%.After approximately 15 flights, both tire and brake wear still remained at 0%, with no signs of deterioration.I'm not sure whether the tires and brakes are simply designed to have such a long service life and require more flights before showing any wear, or whether this could be a bug.To investigate further, I performed a maintenance reset and then completed approximately four additional flights. However, the results remained exactly the same as before: neither tire nor brake wear showed any increase.The attached screenshot was taken after this additional testing.Could anyone confirm whether this is the expected behavior in v1.0.7, or whether there might be an issue with the tire and brake wear calculations?
Tuesday at 11:46 PM1 day Staff 2 hours ago, hu hu said:I noticed a possible issue with the maintenance system in A380 v1.0.7.After multiple flights, I noticed that the values on the Maintenance page change for almost all items, except for the Landing Gear section, which remains at 0%.After approximately 15 flights, both tire and brake wear still remained at 0%, with no signs of deterioration.I'm not sure whether the tires and brakes are simply designed to have such a long service life and require more flights before showing any wear, or whether this could be a bug.To investigate further, I performed a maintenance reset and then completed approximately four additional flights. However, the results remained exactly the same as before: neither tire nor brake wear showed any increase.The attached screenshot was taken after this additional testing.Could anyone confirm whether this is the expected behavior in v1.0.7, or whether there might be an issue with the tire and brake wear calculations?Thanks for your report! I will forward this to the dev team for further review.Appreciate your patience 🙂 Kyle - Community Manager iniBuilds Ltd. | inibuilds.com
3 hours ago3 hr I think we have similar threads about the Maintenance page.Some values are changing in time, others don't. But if you come to a critical value, nothing happens see screenshot. My batteries were at 0 % and Hydraulics also way low, but no effect in operation.
Create an account or sign in to comment