Hi all something to look at

Image 1

Once Engines are on the Spoilers raise and stay with the aircraft until after takeoff, turn engines off they drop down.
Image 2




Inflight this occurs flashing/flickering as the wishing to deploy up every now and then once you land image 1 occurs until engines are switch off. as in image 2

I have tried massive dead zones for it to go away I just cannot fix the spoiler issue. I tried binding a key even removing all commands for this axis.
Just stay up a fraction. I turned off all panels and hardware only using a mouse still stay as image 1

Something for you to look at

Kind Regards

Rich@VPDU
Whitey

Edited 14 hours ago14 hr by Whitey015
removing some errors

Do you also have the issue on Takeoff? I don't know if it is the same issue with the speedbrakes, but after setting takeoff thrust, the aircraft accelerates until about 50 kts and then is braking down to about 10 kts. Without doing anything, the plane accelerates thereafter to normal Takeoff power.

I will check if the speedbrakes are out during this. I will report.

Ok, I just learned that my issue is Autobrake related.

I also have this Speedbrake indication coming here and then. But there is no surface deployment, just an indicating issue see screenshot.

I have the same issue in all a380, a350 and a340 too