ILS Signal Capture Issue on A350-900ULR (No Cabin Version)

[KAIL]

Hi,

I am currently experiencing an issue where the ILS signal is not being captured while flying the iniBuilds A350-900ULR (No Cabin model).

Here are the specific details of the problem:

• Symptoms: The ILS frequency appears in magenta on the bottom-left of the PFD, indicating that the aircraft has tuned to the station. However, the ILS scales (diamonds) do not appear, and the signal is never captured.

• Troubleshooting Performed:

  • I have tried manually tuning the ILS frequencies in the RAD NAV page.

  • I have verified that my Navigraph AIRAC cycle is updated to the latest version.

  • I tested multiple airports (including default sceneries) to rule out specific scenery issues, but the result remains the same.

• Comparison: Interestingly, RNAV approaches work perfectly fine. Both the Localizer and Glide Path indications appear and can be captured without any issues.

Is there a specific setting or a known bug regarding the ILS reception on this version? I would appreciate any guidance on how to resolve this.

Best regards,

[frank_m]

Please test it without the Navigraph Navdata Addons (remove both!). If it works, it is most likely the "package_order_hint" problem. At least the symptoms match exactly.

[tr0mb0n1st]

On 2026/4/19 at AM3点28分, KAIL said:

你好，

我目前遇到一个问题，在使用iniBuilds A350-900ULR（无客舱模型） 飞行时，无法捕获 ILS 信号。

以下是问题的具体细节：

• 症状：主飞行显示器（PFD）左下角 以洋红色显示ILS频率，表明飞机已调谐至该电台。然而，ILS刻度（菱形）未显示，且始终无法接收到信号。

• 已执行故障排除：

  • 我已尝试在 RAD NAV 页面中手动调整 ILS 频率。

  • 我已经确认我的Navigraph AIRAC 循环已更新至最新版本。

  • 我测试了多个机场（包括默认场景），以排除特定场景的问题，但结果仍然相同。

• 对比：有趣的是，RNAV进近完全正常。定位器和滑行道指示均能正常显示并被顺利捕获。

这个版本在ILS接收方面是否存在特定设置或已知错误？非常感谢您能提供任何解决此问题的指导。

此致，

same problem here!

[frank_m]

Did you test the package_order_hint Problem?

[KAIL]

It works fine when I'm not using Navigraph Navdata.
However, once I reinstall and use Navigraph, the same issue persists, and neither reinstalling the aircraft nor the Navdata fixes it. Since it does work normally on occasion—similar to the issue where maps fail to load in the "Enroute" phase—there seems to be a problem with the Navigraph data integration.
I'll check if resetting my Navigraph account in the settings resolves the issue and will get back to you with an update.
 

[frank_m]

No, it is not the Navigraph integration. It is the "package_order_hint" problem. You have at least one addon not compatible with the FS2024 in your community folder. It has no package_order_hint entry in its manifest.json. This leads to addons sorted and applied in an incorrect order, and the Navigraph navdata does not work like expected. The addon don't has to be active or used in the current flight, it is sufficient, if it is in the community folder. Also the addon itself works flawlessly, but it distubs others. There are many and long threads in the Navigraph forum dealing with this problem. 

Long story short: You have to ensure, all your addons have an appropriate package_order_hint entry. Either by using only addons released for FS2024 or by adding the entry yourself. 

[KAIL]

 

In that case, do I need to check every single addon in the community folder, or should I only focus on the ones related to the ini A350?