Variables for Parking Brake

[Hnanse_Rolf]

I need the variables to handle the parking brakes for the A350 in a code. The first is the handle e.g. how to move it (found no working variable) and the second is the parking brakes itself. I experimented with 

• B:LANDING_GEAR_PARKINGBRAKE_Set: (1 for ON, 0 for OFF).
• B:LANDING_GEAR_PARKINGBRAKE_TOGGLE: (1 to toggle).

but none of them worked for me. I would appreciate any help to solve this problem. Thanks!

Rolf

Edited yesterday at 01:30 PM by Hnanse_Rolf

[IniJamir]

Hi, you should be able to use the Key Events here

Let me know if this helps. Thank you 🙂

[Hnanse_Rolf]

Hi, thanks for the tip to use "PARKING_BRAKE_SET" but unfortunately it did not work. I tried it as a K: as well as a B: event and using the values 0 as well as 1. But the handle did not move from SET and the indication on the PFD as well as the TOMemo in the EWD stays that the brakes are set.

The code I used p.e.: <Val Code="(K:PARKING_BRAKE_SET) 1 =="/> - a similar code worked seamingless well in other planes like the FENIX A320.

Please suggest what else code I should try to set the brakes to OFF. Thanks.

[IniJamir]

Hi, one of our team members were able to verify that PARKING_BRAKE_TOGGLE did work, are there any settings that are conflicting between the base sim and any external applications you might be using?