Thrustmaster throttle calibration not working

[davidboyd187]

Hi Guys, I've read the manual, created a new msfs settings control profile for my thrustmaster TCA controls, only using binds Throttle axis 1, 2, 3 but reverse thrust does not work. I've tried using pfb to calibrate several times and it doesn't work. I have  reverse thrust toggled.

Also the levers go from idle to 100% when I push them from idle to the climb detent and not the full motion. I.E idle through to toga.

Please help as it driving me mad. 

[IniJamir]

I'll reach out to the team and ask, there was another issue with WinWing and Calibrations

[IniJamir]

Hi, an update came out right after you had posted this @davidboyd187, are you able to check gain and see if there is any change in behavior from 1.0?

[davidboyd187]

Yeah! Will do, I'll try at the weekend and let you know. 

[davidboyd187]

It's not working properly even after the update. I've downloaded the update, uninstalled it, reinstalled it, restarted the sim. It's still not working. Please try and help otherwise I might need a refund because its unplayable. I'll upload some pictures. Let me know if you want videos. I can't upload them here because the files are too bug.

To summarise:

Ive setup a new control profile. 

Only throttle binds I'm using are:

Axis 1 - left lever

Axis 2 - right lever

Axis 3 - right lever

Calibrating using the pfb. Setting reverse full and idle doesn't sync 

When at Idle reverse thrust is on.

Wheh I move the levers to full engine it only goes to the climb detent. Not right through to toga.

Despite me starting with reverse thrust set, reverse idle set, idle set and full set to toga. None of it works. The bars on the pfb don't even move correctly. Please help.

 

[IniJamir]

Thank you for the additional information, this issue has been logged for the team and is under review, thank you.

[davidboyd187]

Hi Jamie, another update but the throttle calibration is still not working. Do you know when it's going to be fixed or looked at?

[IniJamir]

11 minutes ago, davidboyd187 said:

Hi Jamie, another update but the throttle calibration is still not working. Do you know when it's going to be fixed or looked at?

It is still being investigated by the team from what I can see, has not been forgotten. Thank you 🙂

[davidboyd187]

OK thanks. Any idea of timeframe and are other users reporting the same issue?

[Max Weight]

The TCA throttle is a bit of a pain at times, I just tried mine and its working OK, do you have the same MSFS controller settings as the pic? You may need to fiddle the axis a little to avoid it detecting the airbus detents as a button, if it detects the throttle movement as a button just hit the delete button in the Throttle setting so it says scanning again and move the throttle again, took me a few attempts, as per the vid.