phoenixegmh Posted April 1 Posted April 1 INS Only config with drift, waypoints loaded from PFB. Made an E/W error in position update on INS 1, but still tracking route reasonably well. Attached screenshot, INS2 has been updated to correct position within last 2 mins so is accurate. Littlenavmap plot shown to show how on track we are!
IniJamir Posted April 1 Posted April 1 Hi, I am sorry but maybe I don't understand, is this a compliment on the accuracy, or is it too accurate? Thanks 🙂
phoenixegmh Posted April 2 Author Posted April 2 It's wildly wrong. I put an incorrect position in INS 1 (E instead of W) on a nav update and it somehow still followed the track as though it was in the correct position.
phoenixegmh Posted April 2 Author Posted April 2 Further information of unexpected behaviour during test: Loaded at EGVN on threshold RWY 25 with flightplan to EDDV loaded. Aligned all three INS to current location correctly (51 45.2N 001 33.8W), loaded plan on PFB and sent to INS. Checked waypoints loaded correctly. Set both sides to INS and verified HSI readouts correct. Changed INS 1 posn to same coords but E instead of W. Observed Pilot HSI change to give a larger distance ~120nm and lateral deviation before it then returned to match Copilot side. I don't believe the Tristar INS' were loaded in a Triple Mix config and almost certainly didn't have error rejection in so Pilot INS should continue to report erroneously. See below video (note DME did not change in this recording) https://drive.google.com/file/d/10QXu7MvoKVst0D9W2GsB4cAMIknQ5Xi-/view?usp=sharing
IniJamir Posted April 2 Posted April 2 Hi, thank you for this additional info, I will pass it along to the team.
Recommended Posts