Nose wheel steering not working after landing (plus a few other things)

[Michael Crichlow]

I just completed a flight from KATL to TBPB. After landing, I could not steer the aircraft. This has happened twice now. Also Company MSG and Cabin Ready are displayed below seatbelts. no smoking and No Mobile. Any advice on how to fix these especially the nose wheel steering would be greatly appreciated. (I have V1.23).

Edited March 15 by Michael Crichlow
punctuation.

[Michael Crichlow]

3 minutes ago, Michael Crichlow said:

I just completed a flight from KATL to TBPB. After landing, I could not steer the aircraft. This has happened twice now. Also Company MSG and Cabin Ready are displayed below seatbelts. no smoking and No Mobile. Any advice on how to fix these especially the nose wheel steering would be greatly appreciated. (I have V1.23).

Also, when I checked, I noticed that my tiller was not moving.

[ClaasKrause]

I had that very same bug few months ago. 

[IniJamir]

Noted, thanks

As for the nose wheel steering issue, I have not had this issue occur. Let me know if it keeps occurring 

[Motown]

I have the same problem.

[Merlin75]

Just had this after a Flight from Manchester to Orlando. I checked the settings in the EFB and it was set how it said online it should be. The steering worked fine at Manchester and after landing I followed the advise I could find online but nope this plane would not steer.  I don't think I'm ever going to use this aircraft again it's been nothing but trouble with either not steering after landing or WASM crashes. Ohh well £71 wasted I guess.  

[ShrekFS]

A friend encountered this bug on a 2 hour flight last night - Aircraft just wouldn't steer 

[ShrekFS]

I've just encountered this bug again , lost nose steering after a 3 hour flight.

Giving my joystick full left/right twist and wheel on the plane barely moving , restart sim and back to normal 

 

 

[ekosif]

There is a pushbutton on top of the tiller control arm, left side of the captain. If it happens again, can you guys check it? I put a screenshot below: Just press the button and check again if it is working.

[luke.p.wagner]

I had this happen the other night also. I toggled the disconnect on the tiller control arm and it didn't do anything.