Andrew M Posted December 15, 2025 Posted December 15, 2025 Has anyone had, or have a fix for, the ECAM handing on the 350? I have a problem where after clearing the initial failed system, each secondary failure page immediately gets 'ticked' off without giving me time to run the procedure correctly. It subsequently speeds through the ECAM procedure until it gets to the status page.
Andrew M Posted December 16, 2025 Author Posted December 16, 2025 (edited) GIF of the issue Additionally, unable to deactivate abnormal ECAM's, therefore leaving incorrect deferred ECAM procedures. Edited December 16, 2025 by Andrew M
Andrew M Posted December 19, 2025 Author Posted December 19, 2025 Also tested on v1.2.0 and the issue still exists.
silentghostx Posted December 19, 2025 Posted December 19, 2025 Haven’t had or seen this issue before… have you checked hardware binding? Possibly an issue with a key or a component that’s doing the automatic tick off..?
Andrew M Posted December 20, 2025 Author Posted December 20, 2025 I've checked hardware binding and confirmed that it's not an issue with the ECAM item being ticked unaware, also demonstrated that activating the item in the Abnormal checklist requires it actively being ticked. A re-install also has not resolved the problem either.
silentghostx Posted December 23, 2025 Posted December 23, 2025 Hmmm not sure what’s going on there with your set up. I tried the same ABN checklist on my side, forgot to record at the first few items but here’s mine - seems to be working ok.
Andrew M Posted December 25, 2025 Author Posted December 25, 2025 I have found that by mapping a key to the ECAM tick release can prevent the issue, provided the tick release is actuated prior to any checklist. If the release hasn't occurred at least once prior, the issue remains.
silentghostx Posted December 25, 2025 Posted December 25, 2025 Interesting! What hardware peripherals do you have? I’ve never heard of that specific binding before - I have the Winwing Stick, FCU, MCDU, and Thrustmaster Airbus throttle.
Andrew M Posted December 26, 2025 Author Posted December 26, 2025 Minicockpit FCU and EFIS control, Winwing stick, MCDU and AGP. Several Stream Deck units. This has been an issue for me ever since I purchased the A350 on day one of its release.
silentghostx Posted 13 hours ago Posted 13 hours ago I assume you’re using MobiFlight? I don’t have any checklist tick mapped for the A350. I used it in the A380 for the electronic checklist without issue though
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now