Auto Pilot Keeps Disconnecting & Aircraft Lists To The Left

[Stoneman101.1]

Hey guys,

Even with the new update, I did a flight from MSP-ATL and the auto pilot kept disconnecting during the flight.  The flight duration was 2:25 and the auto pilot disconnected 6 times. Every time I reconnect it, it is stable for about another 25 to 30 minutes.

The other problem is, the aircraft lists to the left about 3 to 5 degrees or so most of the flight.  

MSFS 2020

[Eddie]

Hello,

Do you have any default MSFS assistance options enabled? Please ensure all are disabled. 
Also make sure your turbulence setting is set to LOW.

Let me know if that helps!
Thank you 🙂

[Stoneman101.1]

I'll check it out and report back.  Thank you.

[Stoneman101.1]

Turned down turbulence to low, during the short flight from DTW TO MSP 2 hrs, AP disconnected once.  But as tou can see, (attached) the aircraft still lists to the left. Plus looks like the left aileron is trying to compensate. 

Edited December 21, 2025 by Stoneman101.1

[Yorkshireman67]

Got same issue,3hrs 30 mins into a 4hr flight and same issue.

Using Spad and thrustmaster TCA and quadrant,had to disconnect spad and TCA which seem to correct it,whether that's coincidental or what i don't know.

Also turned down settings in activesky...winds aloft...my altitude was FL390

Regards Dave

Edited December 22, 2025 by Yorkshireman67

[iniSteven]

Hi stoneman - your rudder is not centered. You may have accidentally pressed Q or E or otherwise have a control binding conflict.

[Stoneman101.1]

It is centered, I calibrate before every flight.  All other aircraft including the A300F fly perfect.

Edited December 31, 2025 by Stoneman101.1