Hello there. Just did my first Flight from FIMP to FACT. That is an 6 Houer flight so when I was on 38.000 feet I turned on 2x Compression. I had no Problems in FIMP or FACT with roling on the ground, steering, taking of or what so ever. I also had no Problems with Frame Rate drop in cruise as mentioned here. The whole flight was a pleasure, also the landing in Fact, spoilers deployed as they should, Reversers worked etc. 

So now two Questions. I could not delete a Discontinuity, there is no DEL Button or what so ever. So how does that work? It did not work with CLR Command. And on sitting at the Safe Doc in Fact the rescue slide deployed. Does that happen, when the Aircraft is not 100% at the Dock with TCAS still engaged?

Thank you for answering and have a nice evening.

Edited October 12, 2025Oct 12 by Bob57

press clr - use LSK (left button) on the MCDU on the disc line (like in the A320) doesn't work?

No, that did not work. Maybe a Problem streaming? I will try that again. Thanks for answering. 

you can download the aircraft instead of streaming in your library

I will give that a try and will see how Performance compares. I have no Problems so far (I guess) but when internet traffic is high on weekends. Well I will see. Thank yu for your advice.

Works now, thx for helping. 

Ok, next Flight done from LZH to OTHH. Crash obly after standing at the Dock at OTHH when GSX told me to first shut down Engines before aquirung Ground. Anyway not a big Problem since the rest was a pleasent flight. 

But again I could not delete the Discontinuity. Got the Message "not allowed" as in the first flight. And the GSX Profile from OTHH (iniBuilds) is a mess as well. Suddently under my Plane a Bus releasing Passengers.

So anny suggestions are very much apreciated.

And not to forget I allways get "Landing inhibid", but everything works as it should.

5 minutes ago, Bob57 said:

And not to forget I allways get "Landing inhibid", but everything works as it should.

It’s normal ECAM message during landing

What is the waypoint called right before the discontinuity? If it's called "MANUAL" you will need to delete that manual waypoint first and then delete the Discontinuity.

I can see the (DECEL) but I mean what is before that ?

Edited October 16, 2025Oct 16 by DroneSim

Thx, I will have a look when I am back. But I am sure that was the matter. 

I have looked now at the screenshot. Yes there was a MANUAL Sign. So thank you for the advice how to handle it.