Detailed freeze report

[Roadie04]

Today I made flight from KCLT to EDDM.

One hour before TOD I set the approach (RWY/STAR/VIA) for EDDM. I checked the flightplan and saw I used the wrong STAR. The runway was 26R ,the VIA was MIQ but the STAR was BETO1B. So I went back to the arrival page on the FMC. I didn't change the RWY neither the VIA only the STAR to ROKI1B. Then the plane partially frozen. No sidestick command, no throttle command and some other functions didn't work. 

I tried to save my flight. So I pushed the "save now" button and entered a text but the flight wasn't saved.

Next I restart the flight by using the last autosave on a runway near the frozen point.

At the first try the plane starts in cold and dark. I put on the ext. power and load the last autosave. But it was the same conditions like the frozen one.

Second try I set the plane again at the same Airport. The plane came up in "ready for takeoff" mode, but also partially frozen as before.

Third try, same Airport, same mode as before, and everthing works. I set the right approach (26R/MIQ/ROKI1B) w/o any error.

 

Maybe someone can reproduce this error to find a solution for this issue.

 

Frustrated regards 

Edited July 14 by Roadie04

[Roadie04]

Update:

Today the next crash. When I entered the approach data for EDDM the plane hung up. I set the RWY to 08L, the appr to ILS08L at this moment the plane freeze.

After restart the plane at EBBR. The plane came up, I load the last autosave file and waited until the plane was stable. Then I entered the approach again. Same issue.

Next I restarted the sim, load the aircraft at EBBR, load the last autosave, entered the same approach and voila it works.

I attach the the last autosave file. Maybe someone can reproduce the issue.

 

1753009797.bin