Jump to content

Recommended Posts

Posted

Two scenarios:

  • I had an departure out of RJTT, which I first entered the wrong SID but corrected with the right SID before takeoff. I then took off but realized the SID is still wrong. I entered the waypoints manually but soon my screens were frozen.
  • I was arriving into EBBR, and realized that I did not enter the approach transition. I was already in the STAR, and I tried to enter the transition; no response from the MFD, then I cleared the STAR and re-entered the approach, route modified, but also ended with a screen freeze. 

Suspected both are WASM crash of the same nature.

Posted

Hi @C. Schaffhausen

Apologies you still had a crash.

However in case it happens again, please don't close the sim. Use the below guide to verify and report the WASM crash with all the requested information, especially screenshots and reproduction steps. 

Thanks!

Vrishabh Sehgal @Richboy2307 )
Community Team Member & Tester
iniBuilds Ltd. | inibuilds.com

Posted
17 hours ago, C. Schaffhausen said:

Two scenarios:

  • I had an departure out of RJTT, which I first entered the wrong SID but corrected with the right SID before takeoff. I then took off but realized the SID is still wrong. I entered the waypoints manually but soon my screens were frozen.
  • I was arriving into EBBR, and realized that I did not enter the approach transition. I was already in the STAR, and I tried to enter the transition; no response from the MFD, then I cleared the STAR and re-entered the approach, route modified, but also ended with a screen freeze. 

Suspected both are WASM crash of the same nature.

It happens when you change runway and if not than ils is not updating only gets ---- swaping to secondary flight plan makes the plane crash upside down.... inibulids and asobo need to put the weed aside when coding.

Posted
19 hours ago, richboy2307 said:

Hi @C. Schaffhausen

Apologies you still had a crash.

However in case it happens again, please don't close the sim. Use the below guide to verify and report the WASM crash with all the requested information, especially screenshots and reproduction steps. 

Thanks!

Should be easy enough to reproduce from the dev team, setup the aircraft on the rwy and set a SID, takeoff then change your SID, should crash in less than a minute 😉

Posted
4 hours ago, C. Schaffhausen said:

Should be easy enough to reproduce from the dev team, setup the aircraft on the rwy and set a SID, takeoff then change your SID, should crash in less than a minute 😉

I will start doing it and provide it to the developer. It looks like they want this to be fixed and need more testers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...