How to - Calibrate my throttles?

[richboy2307]

You must calibrate your throttles via the aircraft EFB "Throttle Calibration" app.

Firstly you must establish if you use reverse thrust on an axis or not.

• If no, ensure 'REVERSE ON AXIS' is set to NO on the EFB.  You will have to bind reverse thrust to a button / input on your hardware.
• If yes, and you do intend on using reverse thrust on an axis, ensure you set this to YES.

Then you may begin the calibration process by pressing 'START CALIBRATION' button.

• Move your hardware axis physically to its idle position then press the highlighted 'SET IDLE POSITION' button.
• Next, your hardware axis physically to its full forward position then press the highlighted 'SET TOGA POSITION' button.
• You will be greeted with a green bar on the top saying 'THROTTLE CALIBRATION IS SAVED' once completed.

Note: Reload the plane to ensure this change is made properly.