With the newest v1.0.1 installed when I load into the sim for a flight both on the ramp or ready to takeoff on the runway the Navigation Systems Display appears powered on but no buttons will interact with the screen. Once the APUs are started none of the other screens power up and the plane is unflyable. The engine display panel also appears to be powered on while none of the engines are running.

Hi @jdk1995

Please try to reinstall & run the aircraft without your antivirus/firewall enabled. 

If that works, add an exception to your community folder and any '.js' files in that folder. Both in antivirus and firewall programs.

I've seen such reports in the past with other aircraft and that turned out to be the solution.

Thanks!

Unfortunately, this did not solve the problem.

Hi,

Apologies for delayed response!

Just to confirm that it isn't some addon conflict, try running with only the B-1 in your community folder.

To run with a blank community folder without losing your addons:
1. Rename your existing community folder to ``_Community``
2. Create a new ``Community`` folder in its place.
3. Copy only the ``kwikflight-aircraft-bone`` folder inside it.
4. Run the sim and see if same problem persists.

If its working now, then likely something else in your community folder is conflicting with the B-1. In this case, you may need to do some trial-and-error testing to confirm what may be the culprit.

When you're done testing, to restore your addons & community folder:
1. Copy the ``kwikflight-aircraft-bone`` folder back to ``_Community``
2. Delete the new ``Community`` folder you made
3. Rename the ``_Community`` folder to ``Community``

Thanks!