Jump to content

Recommended Posts

Posted

Hello, I recently made a flight from EDDF to LEPA with 15T of fuel, which is calculated. When I took of, I realized that I couldn’t rotate at my calculated VR speed. I had to rotate my stick full to the back to get off the ground but even then it took long (3sec) to rotate . Here’s an example with only 7T of Fuel

I hope you can fix this problem!

harp0nAv

Posted

I found the mistake , it shows the wrong GW to calculate, it shows always 54880 at every mass of fuel . I calculated the V speeds with the wrong weights .

Posted

I found that if you hit the soft key beside weight/cg it takes the wrong cg from the EFB. It should use zfwcg but instead uses gwcg 

 

also the takeoff calculator is wrong, often giving relatively high speeds as well as a v1 = vr. I left Gibraltar earlier and had to use an online calculator as the EFB told me the runway was too short. Online gave me a v1 of 106kts and vr of 134kts on flaps 2 which worked aside from the usual issue that the aircraft doesn’t want to lift off the ground for some reason

 

on the subject of flaps 2 takeoff, I entered 2/1.1up onto the MCDU but the checklist went green when I got to 1+F flaps. Surely it should have stayed blue until I selected 2 to match the MCDU?

Posted

@Azlog ah okay and also when I can takeoff normal, I can’t get more speed, I literally need to climb with 10 degrees and even then I’m not really climbing as I should ( in the first 30s)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...