Jump to content

Some problems after 1.0.5 update


albarraa

Recommended Posts

1/ the TOD is marked at the waypoint which i must be at the initial decent alt

2/the V/DEV dosen't work any more

3/ After take off the planes faces problems with stearing to a waypoint 

The vnav and lnav is not working proparly

Link to comment
Share on other sites

1) FD is not change from first to second turning point on track. 
2) Redused power on take off to 86% RPM. For all modes - FLEX, manual TOGA. Redused power are maintaining till reaching of accelerating altitude.
3) On tablet on Navigraph page airplane positioning is absent.
4)Push zone for switching active radio on COM1 is not active if parking brake are set.
5) During ILS app at small altitude near DH with AP active airplane making left turn up to 30 degrees bank. I disconnect autopilot and make manual landing.

 

Link to comment
Share on other sites

20 hours ago, Aleksey said:

1) FD is not change from first to second turning point on track. 
2) Redused power on take off to 86% RPM. For all modes - FLEX, manual TOGA. Redused power are maintaining till reaching of accelerating altitude.
3) On tablet on Navigraph page airplane positioning is absent.
4)Push zone for switching active radio on COM1 is not active if parking brake are set.
5) During ILS app at small altitude near DH with AP active airplane making left turn up to 30 degrees bank. I disconnect autopilot and make manual landing.

 

For point 2, I think we have the same, reported here: 

 

 

  • Like 1
Link to comment
Share on other sites

I have the same problem related to the redused power on take off since update 1.0.5, at take-off I risk a stall and the landing gear warning will consequently pop up when I retract them.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...