1/ the TOD is marked at the waypoint which i must be at the initial decent alt

2/the V/DEV dosen't work any more

3/ After take off the planes faces problems with stearing to a waypoint 

The vnav and lnav is not working proparly

1) FD is not change from first to second turning point on track. 
2) Redused power on take off to 86% RPM. For all modes - FLEX, manual TOGA. Redused power are maintaining till reaching of accelerating altitude.
3) On tablet on Navigraph page airplane positioning is absent.
4)Push zone for switching active radio on COM1 is not active if parking brake are set.
5) During ILS app at small altitude near DH with AP active airplane making left turn up to 30 degrees bank. I disconnect autopilot and make manual landing.

 

20 hours ago, Aleksey said:

1) FD is not change from first to second turning point on track. 
2) Redused power on take off to 86% RPM. For all modes - FLEX, manual TOGA. Redused power are maintaining till reaching of accelerating altitude.
3) On tablet on Navigraph page airplane positioning is absent.
4)Push zone for switching active radio on COM1 is not active if parking brake are set.
5) During ILS app at small altitude near DH with AP active airplane making left turn up to 30 degrees bank. I disconnect autopilot and make manual landing.

 

For point 2, I think we have the same, reported here: 

 

 

I have the same problem related to the redused power on take off since update 1.0.5.

It seems to me that Take Off Detend zone is not passing by power lewers.

Throttle problems appeared after 1.0.4 or 1.0.5?

All LNAV/VNAV related bugs should be fixed with 1.0.6, please report back if they aren't, thanks!

The problem is still present after patch 1.0.6.

I calibrated the throttle again. While power up during take off the engines still reach only 87% RPM.

I have the same problem related to the redused power on take off since update 1.0.5, at take-off I risk a stall and the landing gear warning will consequently pop up when I retract them.

On 2/8/2024 at 12:54 PM, Aleksey said:

Throttle problems appeared after 1.0.4 or 1.0.5?

for me since 1.0.5 and still present in 1.0.6

Yes, this throttle issue will be fixed in 1.0.7, in the meantime please follow the SOP of spooling up the engines to 50% N1 and then press the TOGA button.