Agent_Wurst Posted December 28, 2023 Share Posted December 28, 2023 In the sim, the Trimmable Horizontal Stabilizer is not movable/trimmable on ground when the ELEC Pumps are ON, not even with ELEC Pumps ON and PTU to the YELLOW system. In this configuration the THS should be movable 1 Link to comment Share on other sites More sharing options...
Deleted Account Posted December 28, 2023 Share Posted December 28, 2023 Thanks, will fix 🙂 Link to comment Share on other sites More sharing options...
Cammac Posted December 28, 2023 Share Posted December 28, 2023 Hi, Thanks for you post. Just checking that you tried this with the IRS in ATT phase and the pitch trim switches on? As even with HYD on and PITCH TRIMS off the trim wheel will not move.  Many thanks Link to comment Share on other sites More sharing options...
Agent_Wurst Posted December 28, 2023 Author Share Posted December 28, 2023 I tried it after a flight, after engine shutdown where the IRS's were still aligned. With the hydraulics on, the THS should be movable, because if you have a pitch trim runaway for example, if you hold the wheel with you hand, both Pitch Trim Levers trip off and you will end up in manual control. So you have full authority of the THS just the the trim wheel. For maintenance actions in real life, this should also be possible on ground when the engines are not running. Link to comment Share on other sites More sharing options...
Administrators iniBuilds Posted December 29, 2023 Administrators Share Posted December 29, 2023 Thanks for feedback. Link to comment Share on other sites More sharing options...
Recommended Posts