DuRo55

Hello, any news about this issues?

Hello Eddie, attached you can find a video that I made to show you another bug in Spartan. Battery switch is ON, Avionics switch is OFF, nothing else unchanged. As you can see, the 530/430 and transponder flashes every 10-15sec or so. You can hera a click sound sometimes (as if one switches anything, but there is nothing to see). This flickering stops if avionics are switched on. Maybe your devs could look at this too, as there is something going wrong in the background electrical system. YouCut_20250824_112848251.mp4

Here is a list of the wing flaps behaviour. As you can see the flaps position is not consistent for clicking up/down. Please take a look at the sequence following: 1st click on button down: wingflaps = 35 degrees 2nd click on button down: wingflaps = 45 degrees 1st click on button up: 20 degrees 2nd click on button: 0 degrees 3rd click down: 15 4th click down: 45 3rd click up: 15 4th click up: 0 5th click down: 17 6th click down: 41 7th click down: 45 5th click up: 12 6th click up: 3 7th click up: 0 If I compare the general behaviour of wingflaps and bellyflaps it's totally different (and I think it's not intentionally). The bellyflaps move approx. 1 degree up and dow for every switch click and I assume this is correct so. But the movement of the wingflats is totally strange.

No, you cannot opt-out any version and you have to mandatory upgrade your version if a new is available. The only possibility is to switch back when you are running a beta version, i. e. SU3beta, then you can opt-out and switch back to SU2realease. But as SU3release ist out now you cannot roll-back to a former version.

Just to make it clear, parkbrake is fine, starter switch not clickable, L/G sys switch clickable but do nothing, flaps are not controlable. If one click on the flaps switch for movibg them down the flaps react but go to 20 degrees or 60 or full or other degrees. Same is for flaps up. It is just not predictable to what position the flaps goes up/down when you click the flaps switch. I mean the belly flaps have the same issue, but I dont know exactly, have to test that. Thanks a lot for any fix.

Hello, ich I did not write anything about parking break?! The Brake works fine here. I Was asking for L/G Sys switch which seems to do just nothing. And if you could overhaul the Landung flaps too, they do not work as expected. sometimes they go to full flaps, sometimes not or they Stick some where in the middle. Thanks again!!

Hello Eddie, please have a look for the LG/SYS switch as it is not working too. You can klick it, but nothing happens and its unclear for what this switch basicly is. Thank you!

Hello heistema, seems we have the same issues. I guess you updated 2024 to SU3, right? I would suggest to open a bug ticket with their support. I did that a couple of minutes before. Maybe it gets more attention as here in forum.

Hi, this are the Events I used to start the engine: Magnetos OFF: B:ENGINE_MAGENTO_1 = 3 Magnetos RIGHT: B:ENGINE_MAGENTO_1 = 2 Magnetos LEFT: B:ENGINE_MAGENTO_1 = 1 Magnetos BOTH: B:ENGINE_MAGENTO_1 = 0 Button to fire engine: Pull: B:INSTRUMENT_MPV_LEVER_CARB_HEAT_CONTROL set to 1 Release: B:INSTRUMENT_MPV_LEVER_CARB_HEAT_CONTROL set to 0 But unfortunately the Spartan isn't working anymore with 2024 SU3. The starter knob does nothing. No mouse reaction, so I cannot start the Spartan. I re-installed, but no luck. I think I throw that thing into the waste...

Hi heistema, thanks for sharing those informations! Do you use any sort of external programm like Spad.next or AxisAndOhs or MobiFlight to start the engine? I am using Spad for that (and my Alpha Controller) and it works without any problems. I can post my binding here if it helps.

Hi heistema, probably it has to do with it, but I don't know. Never find a POH or similiar. The switch does nothing, no reaction at all. IniBuilds doesn't react to my questions here or on Discord. Bad.

Hello, can anybody explain for what this switch is?